Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black copper radiator, 284 by 80 by 60 mm, three 80 mm fan slots

Alphacool

Alphacool NexXxoS UT60 X-Flow 80mm Triple Radiator 60mm Black 14296

SKU CH-919M-3N3P8

Triple 80 mm copper radiator with X-Flow design and countersunk G1/4 ports for flexible 2U server mounting

  • TypeRadiator

Size 80mm

  • Copper construction maximises heat transfer for efficient cooling
  • X-Flow design routes coolant across all fins for optimised circulation
  • Countersunk G1/4 ports allow flexible mounting in tight spaces
  • Triple 80 mm fan layout fits standard 2U server racks
  • Compact 284 × 80 × 60 mm footprint suits dense builds

Alphacool NexXxoS UT60 X-Flow Triple Radiator

The Alphacool NexXxoS UT60 X-Flow is a full-copper liquid-cooling radiator built for 2U server racks. It measures 284 x 80 x 60 mm and accepts three single-sided or six double-sided 80 mm fans. G1/4 ports and countersunk screw plugs allow flexible loop routing. Model 14296 ships new in black.

Who this suits and who should look elsewhere

Builders assembling custom loops inside 2U rack enclosures with 80 mm fan mounts will fit this radiator directly. It is not for loops that need a different fan diameter or a thinner profile than 60 mm. Systems without 80 mm mounting points cannot use it without modification.

Copper construction and X-Flow layout

The radiator uses copper for fins, channels and the pre-chamber to maximise thermal conductivity. X-Flow routing runs coolant from one side to the other across all fins for even heat distribution. Multiple G1/4 inlets and outlets combined with countersunk plugs let you orient the unit as the build requires.

Helstu kostir

  • Copper construction maximises heat transfer for efficient cooling
  • X-Flow design routes coolant across all fins for optimised circulation
  • Countersunk G1/4 ports allow flexible mounting in tight spaces
  • Triple 80 mm fan layout fits standard 2U server racks
  • Compact 284 × 80 × 60 mm footprint suits dense builds

Tæknilýsing

TypeRadiator

Aðrar útgáfur af þessari vöru

1 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the radiator in a 2U server rack and which step is often missed?

Mount the unit using the 284 mm length to fit the 2U space, then connect the G1/4 ports; the step often missed is removing the countersunk screw plugs from the unused inlets and outlets before pressurising the loop.

What maintenance will this copper radiator need over time?

Flush the loop annually with a non-corrosive coolant to prevent oxidation inside the copper channels, and inspect the G1/4 O-rings for wear during each drain.

What thermal limit appears first during sustained load on the X-Flow design?

The 60 mm core thickness restricts fin surface area, so coolant temperature rise becomes the limiting factor before the 80 mm fans reach maximum airflow.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.