BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
APEVIA CORP.
A semi-modular 900W ATX unit with 80+ Bronze efficiency, Active PFC, a blue LED 135mm fan and full protection suite
The Apevia Signature ATX-SN900 delivers 900W of continuous power with 80+ Bronze certification and Active PFC rated at 99% power factor correction. It operates on a single +12V rail design compliant with the ATX 12V 2.3 standard. The unit automatically switches between 110V and 240V input without a manual toggle.
Semi-modular cabling lets builders attach only the required leads, reducing clutter inside the case. Fixed cables include the 20/24-pin main connector and the 8-pin EPS12V connector. Modular ports provide four SATA, four 8-pin (6+2) PCI-E, four peripheral and one floppy connector. A thermally controlled 135mm blue LED fan adjusts speed based on load temperature.
The +12V rail supplies up to 66A, defining how much power is available for modern graphics cards and multi-core processors. Protections include short-circuit, over-voltage, over-power and under-voltage safeguards built on a double forward converter topology. The supplier advises against using this unit for cryptocurrency mining, as sustained heavy loads will shorten its lifespan.
| Type | Proprietary Power Supply |
|---|
The 900W rating is the maximum continuous power the supply can deliver across all rails combined; the single 12V rail provides up to 66A for CPU and GPU loads while the 3.3V and 5V rails each supply up to 20A.
It follows ATX 12V 2.3, which defines the connector layout and voltage tolerances for modern motherboards and graphics cards, ensuring compatibility with dual- or quad-core CPUs and multi-GPU configurations.
The unit uses the standard ATX form factor with a 135mm fan, so it fits any case designed for ATX power supplies and mounts with four screws on the rear panel.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?