BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
APEVIA CORP.
A semi-modular 900W ATX unit with 80+ Bronze efficiency, Active PFC, a blue LED 135mm fan and full protection suite
The Apevia Signature ATX-SN900 delivers 900W of continuous power with 80+ Bronze certification and Active PFC rated at 99% power factor correction. It operates on a single +12V rail design compliant with the ATX 12V 2.3 standard. The unit automatically switches between 110V and 240V input without a manual toggle.
Semi-modular cabling lets builders attach only the required leads, reducing clutter inside the case. Fixed cables include the 20/24-pin main connector and the 8-pin EPS12V connector. Modular ports provide four SATA, four 8-pin (6+2) PCI-E, four peripheral and one floppy connector. A thermally controlled 135mm blue LED fan adjusts speed based on load temperature.
The +12V rail supplies up to 66A, defining how much power is available for modern graphics cards and multi-core processors. Protections include short-circuit, over-voltage, over-power and under-voltage safeguards built on a double forward converter topology. The supplier advises against using this unit for cryptocurrency mining, as sustained heavy loads will shorten its lifespan.
| Type | Proprietary Power Supply |
|---|
The 900W rating is the maximum continuous power the supply can deliver across all rails combined; the single 12V rail provides up to 66A for CPU and GPU loads while the 3.3V and 5V rails each supply up to 20A.
It follows ATX 12V 2.3, which defines the connector layout and voltage tolerances for modern motherboards and graphics cards, ensuring compatibility with dual- or quad-core CPUs and multi-GPU configurations.
The unit uses the standard ATX form factor with a 135mm fan, so it fits any case designed for ATX power supplies and mounts with four screws on the rear panel.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?