Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular white steel chassis with mesh front panel, tempered glass side, wood accent, Oat White finish

ASUS

ASUS ProArt PA401 MESH Wood Edition PC case, Oat White

SKU CH-4ACP-ARG4R

ATX chassis with mesh side panel, pre-installed 160 mm front fans, 240 mm top radiator support and USB 3.2 Gen 2×2 Type-C front I/O

  • ColorWhite
  • Case MaterialSteel, tempered glass, ABS plastic
  • With Power SupplyNo
  • Motherboard CompatibilityATX
  • Side PanelMesh Panel
  • Front Ports1 USB 3.2 Gen 2×2 Type-C 2 USB 3.2 Gen 1 1 headphone/microph
  • Supports ATX, M-ATX and MINI-ITX boards for flexible builds
  • 160 mm custom front fans move high airflow with low noise
  • Pet-proof power switch lock prevents accidental shutdowns
  • 315 mm GPU clearance and 160 mm CPU cooler height fit large components
  • Front USB 3.2 Gen 2×2 Type-C port enables fast device connections

Wood-finish mesh case for ATX builds

The ASUS ProArt PA401 MESH Wood Edition in Oat White is a steel and tempered-glass chassis with mesh side panels and wood-accented trim. It accepts ATX, M-ATX and MINI-ITX motherboards and ships with three pre-installed fans for immediate airflow.

Check motherboard form-factor and clearances

Verify your board is ATX or smaller and that your CPU cooler does not exceed 160 mm in height. Ensure your graphics card is no longer than 315 mm and your power supply fits within 170 mm depth. Confirm top radiator space matches 240, 140 or 120 mm options.

Pre-installed fans and fan hub simplify cooling

Two 160 mm fans at the front and one 120 mm fan at the rear are already mounted. The included fan hub provides five PWM outputs so additional fans can be managed from a single header. Removable dust filters on the bottom and front aid maintenance.

Priekšrocības

  • Supports ATX, M-ATX and MINI-ITX boards for flexible builds
  • 160 mm custom front fans move high airflow with low noise
  • Pet-proof power switch lock prevents accidental shutdowns
  • 315 mm GPU clearance and 160 mm CPU cooler height fit large components
  • Front USB 3.2 Gen 2×2 Type-C port enables fast device connections

Specifikācijas

BrandASUS
ColorWhite
Case MaterialSteel, tempered glass, ABS plastic
With Power SupplyNo
Motherboard CompatibilityATX
Side PanelMesh Panel
Front Ports1 USB 3.2 Gen 2×2 Type-C
2 USB 3.2 Gen 1
1 headphone/microphone jack

Jautājumi par šo preci

What comes in the box and what do I need to buy separately?

The case ships with two 160 mm front fans, one 120 mm rear fan, a pre-installed fan hub supporting five PWM outputs, removable dust filters on the bottom and front, and a pet-proof power switch lock. You must supply your own power supply, motherboard, CPU cooler, graphics card, storage drives and any additional fans.

Which version should I choose for my ATX build?

This single model supports ATX, micro-ATX and mini-ITX motherboards, offers seven expansion slots, two combined 2.5/3.5-inch bays plus two dedicated 2.5-inch bays, and fits graphics cards up to 315 mm long and power supplies up to 170 mm long.

What does the 315 mm graphics-card clearance mean once the case is built?

It allows most full-length dual- and triple-slot graphics cards to fit with room for front-mounted radiators or fans, while still leaving space for cable routing behind the motherboard tray.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.