Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular white steel chassis with mesh front panel, tempered glass side, wood accent, Oat White finish

ASUS

ASUS ProArt PA401 MESH Wood Edition PC case, Oat White

SKU CH-4ACP-ARG4R

ATX chassis with mesh side panel, pre-installed 160 mm front fans, 240 mm top radiator support and USB 3.2 Gen 2×2 Type-C front I/O

  • ColorWhite
  • Case MaterialSteel, tempered glass, ABS plastic
  • With Power SupplyNo
  • Motherboard CompatibilityATX
  • Side PanelMesh Panel
  • Front Ports1 USB 3.2 Gen 2×2 Type-C 2 USB 3.2 Gen 1 1 headphone/microph
  • Supports ATX, M-ATX and MINI-ITX boards for flexible builds
  • 160 mm custom front fans move high airflow with low noise
  • Pet-proof power switch lock prevents accidental shutdowns
  • 315 mm GPU clearance and 160 mm CPU cooler height fit large components
  • Front USB 3.2 Gen 2×2 Type-C port enables fast device connections

Wood-finish mesh case for ATX builds

The ASUS ProArt PA401 MESH Wood Edition in Oat White is a steel and tempered-glass chassis with mesh side panels and wood-accented trim. It accepts ATX, M-ATX and MINI-ITX motherboards and ships with three pre-installed fans for immediate airflow.

Check motherboard form-factor and clearances

Verify your board is ATX or smaller and that your CPU cooler does not exceed 160 mm in height. Ensure your graphics card is no longer than 315 mm and your power supply fits within 170 mm depth. Confirm top radiator space matches 240, 140 or 120 mm options.

Pre-installed fans and fan hub simplify cooling

Two 160 mm fans at the front and one 120 mm fan at the rear are already mounted. The included fan hub provides five PWM outputs so additional fans can be managed from a single header. Removable dust filters on the bottom and front aid maintenance.

Kohokohdat

  • Supports ATX, M-ATX and MINI-ITX boards for flexible builds
  • 160 mm custom front fans move high airflow with low noise
  • Pet-proof power switch lock prevents accidental shutdowns
  • 315 mm GPU clearance and 160 mm CPU cooler height fit large components
  • Front USB 3.2 Gen 2×2 Type-C port enables fast device connections

Tekniset tiedot

BrandASUS
ColorWhite
Case MaterialSteel, tempered glass, ABS plastic
With Power SupplyNo
Motherboard CompatibilityATX
Side PanelMesh Panel
Front Ports1 USB 3.2 Gen 2×2 Type-C
2 USB 3.2 Gen 1
1 headphone/microphone jack

Kysymyksiä tästä tuotteesta

What comes in the box and what do I need to buy separately?

The case ships with two 160 mm front fans, one 120 mm rear fan, a pre-installed fan hub supporting five PWM outputs, removable dust filters on the bottom and front, and a pet-proof power switch lock. You must supply your own power supply, motherboard, CPU cooler, graphics card, storage drives and any additional fans.

Which version should I choose for my ATX build?

This single model supports ATX, micro-ATX and mini-ITX motherboards, offers seven expansion slots, two combined 2.5/3.5-inch bays plus two dedicated 2.5-inch bays, and fits graphics cards up to 315 mm long and power supplies up to 170 mm long.

What does the 315 mm graphics-card clearance mean once the case is built?

It allows most full-length dual- and triple-slot graphics cards to fit with room for front-mounted radiators or fans, while still leaving space for cable routing behind the motherboard tray.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.