Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Axiom

Axiom SSDEV20LA3T8-AX enterprise SSD 3.84 TB SATA III 2.5" hot-swap

SKU CH-4MJY-YBW84 MPN SSDEV20LA3T8-AX

A 3.84 TB SATA III 2.5" hot-swap enterprise SSD delivering 540 MB/s reads and 480 MB/s writes

  • Form Factor2.5"
  • InterfaceSATA III
  • 84 TB capacity supports large enterprise datasets
  • 540 MB/s read speed accelerates data access
  • 480 MB/s write speed sustains heavy workloads
  • SATA 600 interface integrates with existing servers
  • Hot-swap 2.5" form factor enables zero-downtime maintenance

Enterprise hot-swap SSD for SATA arrays

The Axiom SSDEV20LA3T8-AX is a 3.84 TB solid-state drive built for 2.5-inch hot-swap bays. It connects through a SATA III interface rated at 6 Gb/s. The drive is designed for internal server storage where quick removal and replacement are required.

Suited for read-heavy server workloads

Sequential reads reach 540 MB/s and writes reach 480 MB/s, fitting applications such as boot volumes, logging or caching tiers. Buyers who need sustained write throughput above 480 MB/s should look at alternative interfaces. The RoHS-compliant design meets environmental standards for data-centre deployment.

SATA III 6 Gb/s interface decides compatibility

The drive only operates on controllers that support the SATA/600 standard. Systems limited to 3 Gb/s SATA will bottleneck the stated transfer rates. Verify that the backplane and RAID controller accept 2.5-inch hot-swap SATA drives before purchase.

Priekšrocības

  • 84 TB capacity supports large enterprise datasets
  • 540 MB/s read speed accelerates data access
  • 480 MB/s write speed sustains heavy workloads
  • SATA 600 interface integrates with existing servers
  • Hot-swap 2.5" form factor enables zero-downtime maintenance

Specifikācijas

BrandAxiom
Form Factor2.5"
InterfaceSATA III
Sūtījuma svars0.45 kg
Sūtījuma izmēri25 × 25 × 25 mm

Jautājumi par šo preci

Should I choose the 3.84 TB version or a smaller capacity?

The 3.84 TB model delivers the highest raw capacity in this series; pick it when you need maximum space per drive bay, otherwise select a smaller drive to match your budget or RAID layout.

What does the 540 MB/s read speed mean once the drive is installed in my server?

Sequential reads will peak at 540 MB/s over the SATA III link, so large-file streaming and backup jobs run at near-wire speed while random IOPS depend on the controller and queue depth.

How does the SATA III 600 interface limit real-world performance?

The SATA 600 interface caps throughput at 600 MB/s, so the drive’s 540 MB/s read and 480 MB/s write ratings already sit close to the bus ceiling; you will not see higher sequential speeds on this connector.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.