Axiom
Axiom SSDEV20LA3T8-AX enterprise SSD 3.84 TB SATA III 2.5" hot-swap
A 3.84 TB SATA III 2.5" hot-swap enterprise SSD delivering 540 MB/s reads and 480 MB/s writes
- Form Factor2.5"
- InterfaceSATA III
- 84 TB capacity supports large enterprise datasets
- 540 MB/s read speed accelerates data access
- 480 MB/s write speed sustains heavy workloads
- SATA 600 interface integrates with existing servers
- Hot-swap 2.5" form factor enables zero-downtime maintenance
Enterprise hot-swap SSD for SATA arrays
The Axiom SSDEV20LA3T8-AX is a 3.84 TB solid-state drive built for 2.5-inch hot-swap bays. It connects through a SATA III interface rated at 6 Gb/s. The drive is designed for internal server storage where quick removal and replacement are required.
Suited for read-heavy server workloads
Sequential reads reach 540 MB/s and writes reach 480 MB/s, fitting applications such as boot volumes, logging or caching tiers. Buyers who need sustained write throughput above 480 MB/s should look at alternative interfaces. The RoHS-compliant design meets environmental standards for data-centre deployment.
SATA III 6 Gb/s interface decides compatibility
The drive only operates on controllers that support the SATA/600 standard. Systems limited to 3 Gb/s SATA will bottleneck the stated transfer rates. Verify that the backplane and RAID controller accept 2.5-inch hot-swap SATA drives before purchase.
Pluspunten
- 84 TB capacity supports large enterprise datasets
- 540 MB/s read speed accelerates data access
- 480 MB/s write speed sustains heavy workloads
- SATA 600 interface integrates with existing servers
- Hot-swap 2.5" form factor enables zero-downtime maintenance
Specificaties
| Brand | Axiom |
|---|---|
| Form Factor | 2.5" |
| Interface | SATA III |
| Verzendgewicht | 0.45 kg |
| Pakketafmetingen | 25 × 25 × 25 mm |
Vragen over dit artikel
Should I choose the 3.84 TB version or a smaller capacity?
The 3.84 TB model delivers the highest raw capacity in this series; pick it when you need maximum space per drive bay, otherwise select a smaller drive to match your budget or RAID layout.
What does the 540 MB/s read speed mean once the drive is installed in my server?
Sequential reads will peak at 540 MB/s over the SATA III link, so large-file streaming and backup jobs run at near-wire speed while random IOPS depend on the controller and queue depth.
How does the SATA III 600 interface limit real-world performance?
The SATA 600 interface caps throughput at 600 MB/s, so the drive’s 540 MB/s read and 480 MB/s write ratings already sit close to the bus ceiling; you will not see higher sequential speeds on this connector.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
