NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
biteo
A 2000 W ATX power supply with active PFC, 16 PCIe 6+2-pin connectors and 8 SATA connectors supports up to 8 GPUs for mining or server use
The biteo BT2000W delivers a peak output of 2000 W on a single +12 V rail and is built for mining rigs or servers that run up to eight graphics cards. It accepts 100-240 V input through an active PFC circuit that reaches 80-90 % conversion efficiency. The unit carries 80 Plus series branding and includes full protection against over-voltage, overload, short circuit and high temperature.
The power supply uses a fixed cable set with a 20+4 pin ATX connector, one 4+4 pin CPU connector, sixteen 6+2 pin PCIe connectors, eight SATA connectors and five IDE connectors. Because it is non-modular, all cables must be routed even if unused, so plan cable management space in a 165 mm deep chassis. A common issue is forgetting to seat the 20+4 pin motherboard connector first; the unit will not start without that link.
Verify that your case can accommodate a 165 mm long ATX unit and that airflow can reach the large cooling fan. Confirm the mains supply in your region falls within the 100-240 V range and that a suitable IEC power cord is available, as one is not included. Ensure the motherboard and each graphics card match the provided 20+4 pin, 4+4 pin and 6+2 pin interfaces.
| Brand | biteo |
|---|---|
| Series | 80 Plus |
| Color | Black |
| Type | ATX |
| Maximum Power | 2000 W |
| PFC | Active |
| Main Connector | 20+4Pin |
| +12V Rails | Single |
| PCI-Express Connector | 16 x 6+2-Pin |
| SATA Power Connector | 8 |
| SLI | Certified |
| CrossFire | Certified |
| Max PSU Length | 165 mm |
| Modular | No |
| Efficiency | > 85% |
| Energy-Efficient | WEEE |
| Over Voltage Protection | Yes |
| Overload Protection | Yes |
| Input Voltage | 100 - 240 V |
| Connectors | 1 x 24 pin (20+4) ATX |
| Features | Independent 5V/12V/3.3V feedback |
The unit powers on when the 20+4 pin ATX connector is attached to the motherboard and a mains cable is plugged in; the large fan will spin and the single +12 V rail delivers stable voltage to all connected components.
The package includes the power supply only; a mains power cable is not included and must be purchased separately.
The BT2000W is rated at 2000 W peak and 1800 W continuous, providing sixteen 6+2 pin PCIe connectors to support up to eight graphics cards.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?