Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Six silver nickel-plated brass multi-link fittings for 16mm rigid tubing, G1/4 threads

Bitspower

Bitspower BP-EML16-6P G1/4" Multi-Link Fitting 16mm OD 6-pack

SKU CH-725A-NPRS0 MPN BP-EML16-6P

Six-pack of G1/4" multi-link fittings for 16mm OD rigid tubing with Hi-Flow brass construction and silver nickel finish

  • TypeFittings
  • True Hi-Flow design maximises coolant throughput for 16 mm OD rigid tubing
  • High-quality brass construction ensures structural rigidity and corrosion resistance
  • Durable nickel finish in Silver Shining colour resists wear and discolouration
  • G1/4 inch thread with 5 mm length fits standard water-cooling components
  • RoHS compliant materials meet restricted-substance requirements for safer builds

Six-Pack Fitting Kit

The Bitspower BP-EML16-6P kit contains six G1/4" multi-link fittings built for 16mm outer-diameter rigid tubing. Each piece uses a true Hi-Flow design machined from high-quality brass with a durable nickel finish in Silver Shining colour. The pack suits custom-loop builders who need several identical extension links for a clean, parallel tubing run.

Replaces Single Elbows

Swapping individual angled fittings for these straight multi-link extensions reduces joint count and potential leak paths when bridging parallel components. The upgrade is worth it when a build demands consistent spacing between blocks or radiators and the 5mm thread length matches the port depth on your hardware.

Simple Compression Install

Each fitting seals on the tubing with a standard compression mechanism; the package includes spare O-rings for tubes with slightly smaller outer diameters such as cut brass pipe. Hand-tighten the collar, then run a 24-hour leak test with only the pump powered before filling the full loop. Installation guides have been supplied via QR code on packaging since 2018.

Priekšrocības

  • True Hi-Flow design maximises coolant throughput for 16 mm OD rigid tubing
  • High-quality brass construction ensures structural rigidity and corrosion resistance
  • Durable nickel finish in Silver Shining colour resists wear and discolouration
  • G1/4 inch thread with 5 mm length fits standard water-cooling components
  • RoHS compliant materials meet restricted-substance requirements for safer builds

Specifikācijas

TypeFittings

Jautājumi par šo preci

What thread size and length does the G1/4" multi-link fitting use for mounting?

The fitting uses a G1/4" thread with a 5mm thread length for secure mounting into standard water-cooling ports.

How do you install the multi-link fitting onto 16mm OD rigid tubing, and what common step prevents leaks?

Slide the compression nut and extra O-ring onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand plus a quarter turn; skipping the 24-hour leak test with only the pump powered risks undetected leaks.

Which replacement O-ring should be used if the 16mm rigid tubing has a slightly smaller outer diameter after cutting?

The pack includes an extra O-ring specifically for tubing with a slightly smaller OD, such as brass tubing after cutting, to maintain a watertight seal.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.