Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Six silver nickel-plated brass multi-link fittings for 16mm rigid tubing, G1/4 threads

Bitspower

Bitspower BP-EML16-6P G1/4" Multi-Link Fitting 16mm OD 6-pack

SKU CH-725A-NPRS0 MPN BP-EML16-6P

Six-pack of G1/4" multi-link fittings for 16mm OD rigid tubing with Hi-Flow brass construction and silver nickel finish

  • TypeFittings
  • True Hi-Flow design maximises coolant throughput for 16 mm OD rigid tubing
  • High-quality brass construction ensures structural rigidity and corrosion resistance
  • Durable nickel finish in Silver Shining colour resists wear and discolouration
  • G1/4 inch thread with 5 mm length fits standard water-cooling components
  • RoHS compliant materials meet restricted-substance requirements for safer builds

Six-Pack Fitting Kit

The Bitspower BP-EML16-6P kit contains six G1/4" multi-link fittings built for 16mm outer-diameter rigid tubing. Each piece uses a true Hi-Flow design machined from high-quality brass with a durable nickel finish in Silver Shining colour. The pack suits custom-loop builders who need several identical extension links for a clean, parallel tubing run.

Replaces Single Elbows

Swapping individual angled fittings for these straight multi-link extensions reduces joint count and potential leak paths when bridging parallel components. The upgrade is worth it when a build demands consistent spacing between blocks or radiators and the 5mm thread length matches the port depth on your hardware.

Simple Compression Install

Each fitting seals on the tubing with a standard compression mechanism; the package includes spare O-rings for tubes with slightly smaller outer diameters such as cut brass pipe. Hand-tighten the collar, then run a 24-hour leak test with only the pump powered before filling the full loop. Installation guides have been supplied via QR code on packaging since 2018.

Prednosti

  • True Hi-Flow design maximises coolant throughput for 16 mm OD rigid tubing
  • High-quality brass construction ensures structural rigidity and corrosion resistance
  • Durable nickel finish in Silver Shining colour resists wear and discolouration
  • G1/4 inch thread with 5 mm length fits standard water-cooling components
  • RoHS compliant materials meet restricted-substance requirements for safer builds

Špecifikácie

TypeFittings

Otázky k tomuto produktu

What thread size and length does the G1/4" multi-link fitting use for mounting?

The fitting uses a G1/4" thread with a 5mm thread length for secure mounting into standard water-cooling ports.

How do you install the multi-link fitting onto 16mm OD rigid tubing, and what common step prevents leaks?

Slide the compression nut and extra O-ring onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand plus a quarter turn; skipping the 24-hour leak test with only the pump powered risks undetected leaks.

Which replacement O-ring should be used if the 16mm rigid tubing has a slightly smaller outer diameter after cutting?

The pack includes an extra O-ring specifically for tubing with a slightly smaller OD, such as brass tubing after cutting, to maintain a watertight seal.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.