Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver rectangular 2.5 inch SSD with label showing 256GB MLC SATA III

BIWIN STORAGE TECHNOLOGY LIMITED

BIWIN STORAGE TECHNOLOGY LIMITED 256GB MLC 2.5" SATA internal SSD

SKU CH-720X-ANR5P

A 2.5 inch SATA internal SSD with 256GB of MLC flash delivering sequential reads up to 561MB/s and writes up to 452MB/s

  • Device TypeInternal Solid State Drive (SSD)
  • Form Factor2.5"
  • Capacity256GB
  • Memory ComponentsMLC
  • InterfaceSATA III
  • Power Consumption (Idle)0.25W

Options 256GB

  • MLC flash delivers reliable endurance for daily workloads
  • Sequential read up to 561MB/s speeds up boot and load times
  • Sequential write up to 452MB/s handles large file transfers efficiently
  • BCH ECC 66 bits/1KB protects data integrity during operation
  • Low 0.25W idle power extends laptop battery life

BIWIN 256GB MLC SATA SSD

This 2.5-inch internal solid-state drive uses MLC flash and a SATA III interface to deliver 561MB/s read and 452MB/s write speeds. It targets everyday computing workloads such as operating-system boots, application launches and general file storage. The 7mm height fits standard laptop and desktop drive bays.

256GB capacity and MLC endurance

At 256GB the drive holds a mainstream operating system, core applications and a working set of documents with room for updates. MLC memory provides higher write endurance than entry-level alternatives, while BCH ECC 66 bits/1KB protects data integrity. Active power draw reaches 2.94W and idle drops to 0.25W.

SATA III 6Gb/s interface limits

The SATA III link caps sequential throughput at the stated 561MB/s read and 452MB/s write, so heavier workloads such as sustained 4K video editing or large database writes will saturate the bus. Operating temperature ranges from 0°C to 70°C and shock tolerance is rated at 50G for 11ms half-sine events.

Priekšrocības

  • MLC flash delivers reliable endurance for daily workloads
  • Sequential read up to 561MB/s speeds up boot and load times
  • Sequential write up to 452MB/s handles large file transfers efficiently
  • BCH ECC 66 bits/1KB protects data integrity during operation
  • Low 0.25W idle power extends laptop battery life

Specifikācijas

BrandBIWIN
Device TypeInternal Solid State Drive (SSD)
Form Factor2.5"
Capacity256GB
Memory ComponentsMLC
InterfaceSATA III
Power Consumption (Idle)0.25W
Power Consumption (Active)2.94W
Operating Temperature0°C to 70°C
Storage Temperature-40°C to 85°C
Operating Humidity5% to 95%
Max Shock Resistance50G,11ms, half-sine wave
Max Vibration Resistance3.1G(2-500Hz) 3.9
Height100.2mm
Width69.8mm
Depth7.0mm
Weight=80g

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 2.5" 7mm SATA III drive fit and run alongside my older 3Gb/s SATA motherboard?

The drive is SATA 6Gb/s and backward compatible with SATA 3Gb/s, so it will work on your older board at the slower link speed.

How can I verify the 561MB/s read and 452MB/s write speeds after installation?

Run a sequential benchmark such as CrystalDiskMark; the drive should report speeds near 561MB/s read and 452MB/s write on a SATA 6Gb/s port.

Does the 256GB MLC SSD ship with a mounting bracket, screws or cloning software?

The package contains only the 2.5" 7mm drive; brackets, screws and software must be purchased separately.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.