BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 16GB MLC 2.5" SATA internal SSD
- Internal Solid Stat…
- 2.5"
28,99 US$
0.00036515BTC
Em stock
BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 256GB MLC 2.5" SATA internal SSD
A 2.5 inch SATA internal SSD with 256GB of MLC flash delivering sequential reads up to 561MB/s and writes up to 452MB/s
- Device TypeInternal Solid State Drive (SSD)
- Form Factor2.5"
- Capacity256GB
- Memory ComponentsMLC
- InterfaceSATA III
- Power Consumption (Idle)0.25W
- MLC flash delivers reliable endurance for daily workloads
- Sequential read up to 561MB/s speeds up boot and load times
- Sequential write up to 452MB/s handles large file transfers efficiently
- BCH ECC 66 bits/1KB protects data integrity during operation
- Low 0.25W idle power extends laptop battery life
BIWIN 256GB MLC SATA SSD
This 2.5-inch internal solid-state drive uses MLC flash and a SATA III interface to deliver 561MB/s read and 452MB/s write speeds. It targets everyday computing workloads such as operating-system boots, application launches and general file storage. The 7mm height fits standard laptop and desktop drive bays.
256GB capacity and MLC endurance
At 256GB the drive holds a mainstream operating system, core applications and a working set of documents with room for updates. MLC memory provides higher write endurance than entry-level alternatives, while BCH ECC 66 bits/1KB protects data integrity. Active power draw reaches 2.94W and idle drops to 0.25W.
SATA III 6Gb/s interface limits
The SATA III link caps sequential throughput at the stated 561MB/s read and 452MB/s write, so heavier workloads such as sustained 4K video editing or large database writes will saturate the bus. Operating temperature ranges from 0°C to 70°C and shock tolerance is rated at 50G for 11ms half-sine events.
Pontos fortes
- MLC flash delivers reliable endurance for daily workloads
- Sequential read up to 561MB/s speeds up boot and load times
- Sequential write up to 452MB/s handles large file transfers efficiently
- BCH ECC 66 bits/1KB protects data integrity during operation
- Low 0.25W idle power extends laptop battery life
Especificações
| Brand | BIWIN |
|---|---|
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | 2.5" |
| Capacity | 256GB |
| Memory Components | MLC |
| Interface | SATA III |
| Power Consumption (Idle) | 0.25W |
| Power Consumption (Active) | 2.94W |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Operating Humidity | 5% to 95% |
| Max Shock Resistance | 50G,11ms, half-sine wave |
| Max Vibration Resistance | 3.1G(2-500Hz) 3.9 |
| Height | 100.2mm |
| Width | 69.8mm |
| Depth | 7.0mm |
| Weight | =80g |
Outras versões deste modelo
Mais 3 nesta gama
Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.
BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 64GB MLC 2.5" SATA internal SSD
- Internal Solid Stat…
- 2.5"
28,99 US$
0.00036515BTC
Em stock
BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 128GB MLC 2.5" 7mm SATA internal SSD
- Internal Solid Stat…
- 2.5"
34,99 US$
0.00044072BTC
Em stockPerguntas sobre este artigo
Will the 2.5" 7mm SATA III drive fit and run alongside my older 3Gb/s SATA motherboard?
The drive is SATA 6Gb/s and backward compatible with SATA 3Gb/s, so it will work on your older board at the slower link speed.
How can I verify the 561MB/s read and 452MB/s write speeds after installation?
Run a sequential benchmark such as CrystalDiskMark; the drive should report speeds near 561MB/s read and 452MB/s write on a SATA 6Gb/s port.
Does the 256GB MLC SSD ship with a mounting bracket, screws or cloning software?
The package contains only the 2.5" 7mm drive; brackets, screws and software must be purchased separately.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
