NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Brute Networks
16 GB DDR4-2666 ECC registered RDIMM, CL15, 1.2 V, 1Rx4, HP 868842-001 compatible
This 16GB DDR4 module operates at 2666MHz with CL15 latency and 1.20V voltage. It uses a 288-pin RDIMM form factor with a 1Rx4 rank configuration. The module includes ECC error correction and registered buffering for data integrity. It is designed for server platforms requiring registered memory.
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC functionality corrects single-bit errors and detects multi-bit errors without halting the system. The 1.20V operating voltage supports consistent power draw under load. Major-brand DRAM chips from Samsung, SK Hynix or Micron maintain timing specifications over extended duty cycles.
The DDR4 standard and registered DIMM topology define the maximum module density and rank count the memory controller can address. A 1Rx4 organisation fits within typical single-rank-per-channel limits for this speed grade. Systems not designed for registered ECC memory cannot use this module. Buyers needing higher density per slot must verify platform support for LRDIMM or 3DS variants.
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
The module operates at 1.20V, the standard voltage for DDR4, which helps limit heat output during sustained workloads.
A server motherboard with 288-pin DDR4 slots that support ECC and registered memory is required.
Mixing ranks, speeds or latencies can prevent the system from booting; for best results populate all channels with identical modules.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?