NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Brute Networks
16 GB DDR4-2666 ECC registered RDIMM, CL15, 1.2 V, 1Rx4, HP 868842-001 compatible
This 16GB DDR4 module operates at 2666MHz with CL15 latency and 1.20V voltage. It uses a 288-pin RDIMM form factor with a 1Rx4 rank configuration. The module includes ECC error correction and registered buffering for data integrity. It is designed for server platforms requiring registered memory.
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC functionality corrects single-bit errors and detects multi-bit errors without halting the system. The 1.20V operating voltage supports consistent power draw under load. Major-brand DRAM chips from Samsung, SK Hynix or Micron maintain timing specifications over extended duty cycles.
The DDR4 standard and registered DIMM topology define the maximum module density and rank count the memory controller can address. A 1Rx4 organisation fits within typical single-rank-per-channel limits for this speed grade. Systems not designed for registered ECC memory cannot use this module. Buyers needing higher density per slot must verify platform support for LRDIMM or 3DS variants.
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
The module operates at 1.20V, the standard voltage for DDR4, which helps limit heat output during sustained workloads.
A server motherboard with 288-pin DDR4 slots that support ECC and registered memory is required.
Mixing ranks, speeds or latencies can prevent the system from booting; for best results populate all channels with identical modules.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?