Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Brute Networks

Brute Networks 8GB DDR4-2933 ECC Registered RDIMM 1Rx8 1.2V Dell AA937599

SKU CH-MHRG-KEW4G

8GB DDR4-2933 ECC registered RDIMM with 1.2V operation and Dell AA937599 compatibility

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 2 V operation lowers power draw per module
  • 288-pin DDR4-2933 form factor fits Dell AA937599 slots directly
  • Major-brand Samsung, SK Hynix or Micron chips ensure consistent quality

Dell-Compatible 8GB DDR4-2933 ECC RDIMM

This is an 8GB DDR4-2933 registered DIMM built with ECC for data integrity in server environments. It operates at 1.2V using a 288-pin interface and a 1Rx8 organisation. The module matches Dell part number AA937599 and uses major-brand DRAM chips from Samsung, SK Hynix or Micron. It is sold new with a lifetime warranty.

Server Builders Needing Single-Rank ECC Registered

This module suits administrators expanding or repairing Dell PowerEdge systems that require registered ECC DDR4 at 2933 MT/s. It is not for desktop PCs or laptops that accept only unbuffered non-ECC memory. It is also not for platforms needing higher capacities, dual-rank configurations or faster speeds than PC4-23400.

2933 MT/s Registered ECC at 1.2V

The decisive specification is the DDR4-2933 registered ECC rating at 1.2V in a 288-pin RDIMM form factor. Your server’s memory controller and BIOS must support this exact speed, voltage and registered signalling. If the platform requires a different speed, voltage or unbuffered modules, this part will not function.

Priekšrocības

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 2 V operation lowers power draw per module
  • 288-pin DDR4-2933 form factor fits Dell AA937599 slots directly
  • Major-brand Samsung, SK Hynix or Micron chips ensure consistent quality

Specifikācijas

BrandDell
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

Jautājumi par šo preci

Does my server need a 288-pin DDR4 slot to install this 8GB RDIMM?

Yes, the module uses a 288-pin DDR4 interface and requires a compatible registered DIMM slot.

Can I mix this 2933 MHz registered ECC module with older DDR4 RDIMMs running at a lower speed?

The system will downclock all modules to the slowest installed speed while maintaining ECC and registered operation.

How can I verify the module is running at PC4-23400 with ECC active after installation?

Check the BIOS memory information or OS tools such as dmidecode to confirm 2933 MT/s, registered mode and ECC enabled.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.