Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green 288-pin DDR4 RDIMM module with black chips and silver label

Brute Networks

Brute Networks 8GB DDR4-2933 ECC Registered RDIMM 1Rx8 1.2V Dell AA937599

SKU CH-MHRG-KEW4G

8GB DDR4-2933 ECC registered RDIMM with 1.2V operation and Dell AA937599 compatibility

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 2 V operation lowers power draw per module
  • 288-pin DDR4-2933 form factor fits Dell AA937599 slots directly
  • Major-brand Samsung, SK Hynix or Micron chips ensure consistent quality

Dell-Compatible 8GB DDR4-2933 ECC RDIMM

This is an 8GB DDR4-2933 registered DIMM built with ECC for data integrity in server environments. It operates at 1.2V using a 288-pin interface and a 1Rx8 organisation. The module matches Dell part number AA937599 and uses major-brand DRAM chips from Samsung, SK Hynix or Micron. It is sold new with a lifetime warranty.

Server Builders Needing Single-Rank ECC Registered

This module suits administrators expanding or repairing Dell PowerEdge systems that require registered ECC DDR4 at 2933 MT/s. It is not for desktop PCs or laptops that accept only unbuffered non-ECC memory. It is also not for platforms needing higher capacities, dual-rank configurations or faster speeds than PC4-23400.

2933 MT/s Registered ECC at 1.2V

The decisive specification is the DDR4-2933 registered ECC rating at 1.2V in a 288-pin RDIMM form factor. Your server’s memory controller and BIOS must support this exact speed, voltage and registered signalling. If the platform requires a different speed, voltage or unbuffered modules, this part will not function.

Přednosti

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 2 V operation lowers power draw per module
  • 288-pin DDR4-2933 form factor fits Dell AA937599 slots directly
  • Major-brand Samsung, SK Hynix or Micron chips ensure consistent quality

Specifikace

BrandDell
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

Otázky k tomuto produktu

Does my server need a 288-pin DDR4 slot to install this 8GB RDIMM?

Yes, the module uses a 288-pin DDR4 interface and requires a compatible registered DIMM slot.

Can I mix this 2933 MHz registered ECC module with older DDR4 RDIMMs running at a lower speed?

The system will downclock all modules to the slowest installed speed while maintaining ECC and registered operation.

How can I verify the module is running at PC4-23400 with ECC active after installation?

Check the BIOS memory information or OS tools such as dmidecode to confirm 2933 MT/s, registered mode and ECC enabled.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.