Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Computer Memory Solutions

Computer Memory Solutions 32GB (4x8GB) DDR3 1333 ECC Reg Dell PowerEdge T410 - B103

SKU CH-X1QG-2RSSW

32GB kit of four 8GB DDR3 1333 ECC registered DIMMs validated for Dell PowerEdge T410 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • ECC registered design protects data integrity in server workloads
  • 32GB kit (4 × 8GB) fills four slots for balanced capacity
  • DDR3 1333 speed matches Dell PowerEdge T410 specifications
  • 5V operation with CL9 timing for stable performance
  • 2Rx4 organisation on 240-pin modules ensures compatibility

Dell PowerEdge T410 Server Memory Kit

This 32 GB kit contains four 8 GB registered ECC DIMMs built for the Dell PowerEdge T410. Each module is a 240-pin DDR3 SDRAM rated at 1333 MHz with CL9 timing and 1.5 V operation. The kit targets administrators who need to expand a T410 to its 128 GB maximum using matched 2Rx4 modules.

Sustained Load Behaviour

Under continuous server workloads the registered buffer and ECC circuitry maintain data integrity while the modules run at their rated 1.5 V. When all four DIMMs populate a single CPU the memory controller operates at 1333 MHz; adding a second CPU and filling the second bank reduces speed to 1066 MHz, and populating quad-rank modules in both banks drops the rate further to 800 MHz.

Pre-Installation Checks

Verify that the T410 currently runs registered ECC DIMMs, because mixing registered and unbuffered ECC is not supported. Confirm the installed Xeon model and existing bank population to predict whether the new modules will run at 1333 MHz, 1066 MHz or 800 MHz. Ensure all four sticks in this kit share the same rank and DRAM organisation for correct multi-channel operation.

Priekšrocības

  • ECC registered design protects data integrity in server workloads
  • 32GB kit (4 × 8GB) fills four slots for balanced capacity
  • DDR3 1333 speed matches Dell PowerEdge T410 specifications
  • 5V operation with CL9 timing for stable performance
  • 2Rx4 organisation on 240-pin modules ensures compatibility

Specifikācijas

BrandComputer Memory Solutions
ModelCM10247210600ECCR2R4H
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemDell Poweredge T410
Package Content4 Memory RAM Sticks

Jautājumi par šo preci

How much power does the 1.5 V registered DDR3 kit draw under continuous server load?

Each module runs at 1.5 V; total system draw depends on the Xeon CPU and how many of the eight sockets are populated.

What must the T410 already have installed for this 32 GB kit to function?

A compatible Xeon processor and an empty 240-pin DDR3 slot; the board supports up to 128 GB across eight sockets.

Will the CL9 1333 MHz modules keep their rated speed when paired with older quad-rank sticks in the same bank?

Quad-rank modules force the first bank to 1066 MHz and the second bank to 800 MHz, so mixed populations run slower.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.