Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR3 memory sticks with gold contacts and black chips

Computer Memory Solutions

Computer Memory Solutions 32GB (4x8GB) DDR3 1333 ECC Reg Dell PowerEdge T410 - B103

SKU CH-X1QG-2RSSW

32GB kit of four 8GB DDR3 1333 ECC registered DIMMs validated for Dell PowerEdge T410 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • ECC registered design protects data integrity in server workloads
  • 32GB kit (4 × 8GB) fills four slots for balanced capacity
  • DDR3 1333 speed matches Dell PowerEdge T410 specifications
  • 5V operation with CL9 timing for stable performance
  • 2Rx4 organisation on 240-pin modules ensures compatibility

Dell PowerEdge T410 Server Memory Kit

This 32 GB kit contains four 8 GB registered ECC DIMMs built for the Dell PowerEdge T410. Each module is a 240-pin DDR3 SDRAM rated at 1333 MHz with CL9 timing and 1.5 V operation. The kit targets administrators who need to expand a T410 to its 128 GB maximum using matched 2Rx4 modules.

Sustained Load Behaviour

Under continuous server workloads the registered buffer and ECC circuitry maintain data integrity while the modules run at their rated 1.5 V. When all four DIMMs populate a single CPU the memory controller operates at 1333 MHz; adding a second CPU and filling the second bank reduces speed to 1066 MHz, and populating quad-rank modules in both banks drops the rate further to 800 MHz.

Pre-Installation Checks

Verify that the T410 currently runs registered ECC DIMMs, because mixing registered and unbuffered ECC is not supported. Confirm the installed Xeon model and existing bank population to predict whether the new modules will run at 1333 MHz, 1066 MHz or 800 MHz. Ensure all four sticks in this kit share the same rank and DRAM organisation for correct multi-channel operation.

Kohokohdat

  • ECC registered design protects data integrity in server workloads
  • 32GB kit (4 × 8GB) fills four slots for balanced capacity
  • DDR3 1333 speed matches Dell PowerEdge T410 specifications
  • 5V operation with CL9 timing for stable performance
  • 2Rx4 organisation on 240-pin modules ensures compatibility

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM10247210600ECCR2R4H
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemDell Poweredge T410
Package Content4 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

How much power does the 1.5 V registered DDR3 kit draw under continuous server load?

Each module runs at 1.5 V; total system draw depends on the Xeon CPU and how many of the eight sockets are populated.

What must the T410 already have installed for this 32 GB kit to function?

A compatible Xeon processor and an empty 240-pin DDR3 slot; the board supports up to 128 GB across eight sockets.

Will the CL9 1333 MHz modules keep their rated speed when paired with older quad-rank sticks in the same bank?

Quad-rank modules force the first bank to 1066 MHz and the second bank to 800 MHz, so mixed populations run slower.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.