Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four green DDR3 DIMM modules with gold contacts

Computer Memory Solutions

Computer Memory Solutions 32GB (4x8GB) DDR3 1600 ECC Non-Registered DIMM Kit - B90

SKU CH-WEKE-XPBE2

A 32 GB kit of four 8 GB DDR3 1600 ECC unregistered DIMMs validated for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F server boards

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 32 GB capacity across four 8 GB modules for server workloads
  • ECC protection detects and corrects single-bit errors for data integrity
  • DDR3 1600 speed rated at PC3 12800 for responsive performance
  • CL11 latency at 1.5 V for stable operation
  • Validated for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards

Server Memory Kit

This 32GB kit contains four 8GB DDR3 modules built for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards. It targets administrators upgrading compatible servers with ECC protection. The unregistered DIMMs install directly into the board's 240-pin slots. Buyers needing registered memory or a different DDR generation cannot use this kit.

DDR3 1600 ECC Specification

The modules run at 1600MHz with a PC3 12800 rating and CL11 11-11-11 timings at 1.5V. ECC non-registered operation is the single specification that determines compatibility with the listed Supermicro platforms. A different speed, voltage or buffering type will not work in these systems.

Thermals and Power

Each DIMM operates at the standard 1.5V DDR3 voltage without a heat spreader unless current inventory includes one. Power draw stays within normal DDR3 limits for 8GB unbuffered modules. No active cooling is required and acoustic noise is zero.

Priekšrocības

  • 32 GB capacity across four 8 GB modules for server workloads
  • ECC protection detects and corrects single-bit errors for data integrity
  • DDR3 1600 speed rated at PC3 12800 for responsive performance
  • CL11 latency at 1.5 V for stable operation
  • Validated for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards

Specifikācijas

BrandComputer Memory Solutions
ModelCM10247212800ECCNRDIMM2R8
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemSupermicro X10Sll-F, X10Sll+-F, X10Slh-F Motherboard
Package Content4 Memory RAM Sticks

Jautājumi par šo preci

What does the 1600 MHz rating mean for actual throughput in a Supermicro X10SLL-F?

Each module operates at 1600 MT/s with CL11 timing at 1.5 V, delivering the standard DDR3-1600 data rate when installed in the supported Supermicro boards.

How does the 240-pin DDR3 interface limit speed on these motherboards?

The 240-pin DDR3 slots on the X10SLL-F series cap memory at 1600 MT/s, so this kit runs at the maximum speed the platform allows.

Will the four 8 GB sticks fit the DIMM sockets on an X10SLH-F?

Yes, the kit provides four 240-pin unregistered ECC DIMMs that match the four sockets on the X10SLH-F motherboard.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.