Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Four green DDR3 DIMM modules with gold contacts

Computer Memory Solutions

Computer Memory Solutions 32GB (4x8GB) DDR3 1600 ECC Non-Registered DIMM Kit - B90

SKU CH-WEKE-XPBE2

A 32 GB kit of four 8 GB DDR3 1600 ECC unregistered DIMMs validated for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F server boards

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 32 GB capacity across four 8 GB modules for server workloads
  • ECC protection detects and corrects single-bit errors for data integrity
  • DDR3 1600 speed rated at PC3 12800 for responsive performance
  • CL11 latency at 1.5 V for stable operation
  • Validated for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards

Server Memory Kit

This 32GB kit contains four 8GB DDR3 modules built for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards. It targets administrators upgrading compatible servers with ECC protection. The unregistered DIMMs install directly into the board's 240-pin slots. Buyers needing registered memory or a different DDR generation cannot use this kit.

DDR3 1600 ECC Specification

The modules run at 1600MHz with a PC3 12800 rating and CL11 11-11-11 timings at 1.5V. ECC non-registered operation is the single specification that determines compatibility with the listed Supermicro platforms. A different speed, voltage or buffering type will not work in these systems.

Thermals and Power

Each DIMM operates at the standard 1.5V DDR3 voltage without a heat spreader unless current inventory includes one. Power draw stays within normal DDR3 limits for 8GB unbuffered modules. No active cooling is required and acoustic noise is zero.

Punti di forza

  • 32 GB capacity across four 8 GB modules for server workloads
  • ECC protection detects and corrects single-bit errors for data integrity
  • DDR3 1600 speed rated at PC3 12800 for responsive performance
  • CL11 latency at 1.5 V for stable operation
  • Validated for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards

Caratteristiche tecniche

BrandComputer Memory Solutions
ModelCM10247212800ECCNRDIMM2R8
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemSupermicro X10Sll-F, X10Sll+-F, X10Slh-F Motherboard
Package Content4 Memory RAM Sticks

Domande su questo articolo

What does the 1600 MHz rating mean for actual throughput in a Supermicro X10SLL-F?

Each module operates at 1600 MT/s with CL11 timing at 1.5 V, delivering the standard DDR3-1600 data rate when installed in the supported Supermicro boards.

How does the 240-pin DDR3 interface limit speed on these motherboards?

The 240-pin DDR3 slots on the X10SLL-F series cap memory at 1600 MT/s, so this kit runs at the maximum speed the platform allows.

Will the four 8 GB sticks fit the DIMM sockets on an X10SLH-F?

Yes, the kit provides four 240-pin unregistered ECC DIMMs that match the four sockets on the X10SLH-F motherboard.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.