NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Computer Memory Solutions
Four 2 GB DDR2 fully-buffered ECC DIMMs at 667 MHz for PC2-5300 servers
This 8 GB kit consists of four 2 GB DDR2 fully buffered DIMMs rated at 667 MHz with CL5 timings. It is built for servers and workstations that require registered ECC memory in a 240-pin form factor. The modules operate at 1.8 V and use a 2Rx4 organisation. Buyers needing unbuffered desktop DDR2 or higher capacities per module should look elsewhere.
Each module runs at the standard 1.8 V DDR2 voltage, keeping power draw modest for fully buffered designs. No heat spreaders are included unless current inventory specifies them, so airflow across the sticks is the primary cooling method. Fan noise will depend entirely on the server chassis and its fan curves. Systems without adequate front-to-back airflow may see higher temperatures under sustained load.
The 240-pin fully buffered DIMM keying prevents accidental installation in standard desktop slots, ensuring the kit only fits compatible server boards. Four modules must populate the correct channels for full capacity and error-correcting function. The kit is covered by the manufacturer's limited lifetime warranty when purchased directly, and the genuine major-brand chipset supports long-term reliability in 24/7 environments.
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM256725300FBDIMM2R4 |
| Capacity | 8GB (4 x 2GB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Timing | 5-5-5 |
| Voltage | 1.8V |
| ECC | Yes |
| Buffered/Registered | Fully Buffered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Pc5300 Server |
| Package Content | 2 Memory RAM Sticks |
Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both ejector clips click, then populate all four channels in the order the service manual specifies — skipping the channel sequence is the step most often missed.
DDR2 FB-DIMM modules have no moving parts or batteries; the only later action is replacement if a module fails or if the server is upgraded to a platform that no longer supports DDR2 technology.
The DDR2-667 bus speed and CL5 latency set the throughput ceiling; under sustained use the memory controller reaches its maximum bandwidth before thermal or voltage limits become a factor.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?