NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Computer Memory Solutions
Four 2 GB DDR2 fully-buffered ECC DIMMs at 667 MHz for PC2-5300 servers
This 8 GB kit consists of four 2 GB DDR2 fully buffered DIMMs rated at 667 MHz with CL5 timings. It is built for servers and workstations that require registered ECC memory in a 240-pin form factor. The modules operate at 1.8 V and use a 2Rx4 organisation. Buyers needing unbuffered desktop DDR2 or higher capacities per module should look elsewhere.
Each module runs at the standard 1.8 V DDR2 voltage, keeping power draw modest for fully buffered designs. No heat spreaders are included unless current inventory specifies them, so airflow across the sticks is the primary cooling method. Fan noise will depend entirely on the server chassis and its fan curves. Systems without adequate front-to-back airflow may see higher temperatures under sustained load.
The 240-pin fully buffered DIMM keying prevents accidental installation in standard desktop slots, ensuring the kit only fits compatible server boards. Four modules must populate the correct channels for full capacity and error-correcting function. The kit is covered by the manufacturer's limited lifetime warranty when purchased directly, and the genuine major-brand chipset supports long-term reliability in 24/7 environments.
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM256725300FBDIMM2R4 |
| Capacity | 8GB (4 x 2GB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Timing | 5-5-5 |
| Voltage | 1.8V |
| ECC | Yes |
| Buffered/Registered | Fully Buffered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Pc5300 Server |
| Package Content | 2 Memory RAM Sticks |
Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both ejector clips click, then populate all four channels in the order the service manual specifies — skipping the channel sequence is the step most often missed.
DDR2 FB-DIMM modules have no moving parts or batteries; the only later action is replacement if a module fails or if the server is upgraded to a platform that no longer supports DDR2 technology.
The DDR2-667 bus speed and CL5 latency set the throughput ceiling; under sustained use the memory controller reaches its maximum bandwidth before thermal or voltage limits become a factor.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?