SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501542BTC
Krājumā
Computer Memory Solutions
Computer Memory Solutions CM10247210600ECCNR2R8 8GB DDR3 1333 ECC Unregistered DIMM memory upgrade
8GB DDR3 1333 ECC unregistered DIMM validated for Supermicro X9SCL and B9DRE server motherboards
- Capacity8GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 8GB capacity supports up to 32GB total system memory
- ECC protection detects and corrects single-bit data errors
- DDR3 1333 MHz speed matches PC3-10600 specification
- Unregistered 240-pin DIMM fits Supermicro X9SCL and B9DRE boards
- 5V operation reduces power draw and heat output
8GB DDR3 ECC DIMM for Supermicro servers
This 8GB DDR3 1333 module adds error-correcting memory to Supermicro X9SCL and B9DRE motherboards. It is built as a single unregistered DIMM for systems that require ECC without registered buffering. The kit contains one stick to fill an available slot. It targets administrators upgrading compatible server boards.
240-pin unregistered layout fits four-slot boards
The module uses a standard 240-pin DDR3 edge connector with no heat spreader. Unregistered signalling keeps the electrical load light on the memory controller. Four DIMM sockets on the supported boards allow a maximum of 32GB when all slots are populated. Major-brand DRAM chips are used throughout.
1.5V operation at CL9 9-9-9 timing
Rated at 1.5 volts, the stick runs at the standard DDR3 voltage for low power draw. CAS latency of nine cycles at 1333 MHz delivers predictable access times. No active cooling is required on the bare PCB. The module operates within normal server thermal limits.
Priekšrocības
- 8GB capacity supports up to 32GB total system memory
- ECC protection detects and corrects single-bit data errors
- DDR3 1333 MHz speed matches PC3-10600 specification
- Unregistered 240-pin DIMM fits Supermicro X9SCL and B9DRE boards
- 5V operation reduces power draw and heat output
Specifikācijas
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10247210600ECCNR2R8 |
| Capacity | 8GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Supermicro MBd-X9Scl-F-B, X9Scl-F, B9Dre Motherboard |
| Package Content | 1Memory Ram Stick |
Jautājumi par šo preci
What speed does the DDR3 1333 PC3-10600 interface run at in practice?
The module operates at 1333 MHz with a PC3-10600 data rate and CL9 9-9-9 timings at 1.5V.
Will this 240-pin DDR3 DIMM fit the four slots on my Supermicro X9SCL-F motherboard?
Yes, the 240-pin unregistered ECC DIMM matches the four DDR3 slots on the X9SCL-F, X9SCL-F-B and B9DRE boards supporting up to 32 GB total.
How do I install this CMS 8 GB stick and what step do people often miss?
Power off the server, open the chassis, align the notch on the 240-pin edge connector, press firmly until both retention clips click, then verify the full 8 GB appears in BIOS.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
