Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black full-tower case with aluminium frame, 4mm tempered glass side panel, open interior visible

Corn Electronics

Corn Electronics MOD3 Full Tower PC Case EATX 400mm GPU 170mm Cooler

SKU CH-37HW-YTSTK MPN MOD3

Full-tower chassis supporting EATX motherboards, 400mm graphics cards and 170mm CPU coolers with room for 360mm radiators and tempered-glass side panel

  • TypeATX Full Tower
  • Motherboard CompatibilityMicro ATX / ATX / Extended ATX
  • Side Panelwith Side Window
  • Internal 3.5" Drive Bays1
  • Internal 2.5" Drive Bays3
  • Expansion Slots7

Options Demon Slayer

  • Batman
  • Stitch
  • Purple
  • Pokemon
  • Demon Slayer
  • Gumdam RX-78-2

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Supports extended ATX boards for high-end builds
  • Fits graphics cards up to 400mm long
  • Accommodates CPU coolers up to 170mm tall
  • Tempered glass side panel shows internal components
  • Front panel includes two USB 3.0 ports

Build Platform

The Corn Electronics MOD3 is a full-tower chassis designed for custom water-cooling loops and showcase builds. Its aluminium-magnesium frame and four-millimetre tempered glass panels create a rigid structure that weighs eight kilograms. The layout supports Extended ATX, ATX, Micro-ATX and Mini-ITX motherboards, giving enthusiasts a wide choice of platforms. Front I/O provides two USB 3.0 ports plus separate audio and microphone jacks.

Sustained Thermal Load

Seven expansion slots and room for a graphics card up to four hundred millimetres long allow high-end GPUs to breathe under continuous load. The top and front each accept three 120-millimetre fans, while radiator mounts handle 120, 240 or 360-millimetre units for liquid cooling. A CPU cooler height limit of one hundred and seventy millimetres accommodates most tower air coolers. The power supply bay fits standard ATX units up to one hundred and ninety-five millimetres deep.

Pre-Install Checklist

Verify that your motherboard form factor matches the supported list and that your graphics card length stays within the four-hundred-millimetre maximum. Confirm the CPU cooler height does not exceed one hundred and seventy millimetres. Ensure the power supply depth is no greater than one hundred and ninety-five millimetres. The drive configuration allows either two 2.5-inch SSDs plus one 3.5-inch HDD or three 2.5-inch SSDs.

Priekšrocības

  • Supports extended ATX boards for high-end builds
  • Fits graphics cards up to 400mm long
  • Accommodates CPU coolers up to 170mm tall
  • Tempered glass side panel shows internal components
  • Front panel includes two USB 3.0 ports

Specifikācijas

ModelMOD3
TypeATX Full Tower
Motherboard CompatibilityMicro ATX / ATX / Extended ATX
Side Panelwith Side Window
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays3
Expansion Slots7
Front PortsUSB3.0*2/AUDIO*1/MIC*1
Fan OptionsTop: 3×120mm Fan Front:3×120mm Fan
Radiator Options360/240/120
Max GPU Length400mm
Max CPU Cooler Height170mm
Max PSU LengthATX(195mm)
Dimensions232MM (W) * 647MM (D) * 620MM (H)
Weight8KG

Citas šī modeļa versijas

Vēl 1 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much noise and heat should I expect when the top and front 120 mm fan mounts are all populated and running continuously?

With up to six 120 mm fans installed the case moves a large volume of air, so component temperatures stay low; actual noise depends on the fan models you choose and the speed curves you set in BIOS or fan-controller software.

Which power supply and motherboard form factors do I need to have on hand before this case will function?

You need a standard ATX power supply no longer than 195 mm and a motherboard that fits Micro ATX, ATX or Extended ATX — the case accepts all three.

Will my existing 360 mm radiator and full-length graphics card fit together in this chassis without interference?

Yes — the top supports a 360 mm radiator and the GPU clearance is 400 mm, so a 360 mm AIO and a 400 mm card can be installed simultaneously.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.