Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black full-tower case with aluminium frame, 4mm tempered glass side panel, open interior visible

Corn Electronics

Corn Electronics MOD3 Full Tower PC Case EATX 400mm GPU 170mm Cooler

SKU CH-37HW-YTSTK MPN MOD3

Full-tower chassis supporting EATX motherboards, 400mm graphics cards and 170mm CPU coolers with room for 360mm radiators and tempered-glass side panel

  • TypeATX Full Tower
  • Motherboard CompatibilityMicro ATX / ATX / Extended ATX
  • Side Panelwith Side Window
  • Internal 3.5" Drive Bays1
  • Internal 2.5" Drive Bays3
  • Expansion Slots7

Options Demon Slayer

  • Batman
  • Stitch
  • Purple
  • Pokemon
  • Demon Slayer
  • Gumdam RX-78-2

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • Supports extended ATX boards for high-end builds
  • Fits graphics cards up to 400mm long
  • Accommodates CPU coolers up to 170mm tall
  • Tempered glass side panel shows internal components
  • Front panel includes two USB 3.0 ports

Build Platform

The Corn Electronics MOD3 is a full-tower chassis designed for custom water-cooling loops and showcase builds. Its aluminium-magnesium frame and four-millimetre tempered glass panels create a rigid structure that weighs eight kilograms. The layout supports Extended ATX, ATX, Micro-ATX and Mini-ITX motherboards, giving enthusiasts a wide choice of platforms. Front I/O provides two USB 3.0 ports plus separate audio and microphone jacks.

Sustained Thermal Load

Seven expansion slots and room for a graphics card up to four hundred millimetres long allow high-end GPUs to breathe under continuous load. The top and front each accept three 120-millimetre fans, while radiator mounts handle 120, 240 or 360-millimetre units for liquid cooling. A CPU cooler height limit of one hundred and seventy millimetres accommodates most tower air coolers. The power supply bay fits standard ATX units up to one hundred and ninety-five millimetres deep.

Pre-Install Checklist

Verify that your motherboard form factor matches the supported list and that your graphics card length stays within the four-hundred-millimetre maximum. Confirm the CPU cooler height does not exceed one hundred and seventy millimetres. Ensure the power supply depth is no greater than one hundred and ninety-five millimetres. The drive configuration allows either two 2.5-inch SSDs plus one 3.5-inch HDD or three 2.5-inch SSDs.

Prednosti

  • Supports extended ATX boards for high-end builds
  • Fits graphics cards up to 400mm long
  • Accommodates CPU coolers up to 170mm tall
  • Tempered glass side panel shows internal components
  • Front panel includes two USB 3.0 ports

Špecifikácie

ModelMOD3
TypeATX Full Tower
Motherboard CompatibilityMicro ATX / ATX / Extended ATX
Side Panelwith Side Window
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays3
Expansion Slots7
Front PortsUSB3.0*2/AUDIO*1/MIC*1
Fan OptionsTop: 3×120mm Fan Front:3×120mm Fan
Radiator Options360/240/120
Max GPU Length400mm
Max CPU Cooler Height170mm
Max PSU LengthATX(195mm)
Dimensions232MM (W) * 647MM (D) * 620MM (H)
Weight8KG

Ďalšie verzie tohto modelu

Ďalších 1 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How much noise and heat should I expect when the top and front 120 mm fan mounts are all populated and running continuously?

With up to six 120 mm fans installed the case moves a large volume of air, so component temperatures stay low; actual noise depends on the fan models you choose and the speed curves you set in BIOS or fan-controller software.

Which power supply and motherboard form factors do I need to have on hand before this case will function?

You need a standard ATX power supply no longer than 195 mm and a motherboard that fits Micro ATX, ATX or Extended ATX — the case accepts all three.

Will my existing 360 mm radiator and full-length graphics card fit together in this chassis without interference?

Yes — the top supports a 360 mm radiator and the GPU clearance is 400 mm, so a 360 mm AIO and a 400 mm card can be installed simultaneously.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.