Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 2U rackmount PDU with LCD screen, rows of C13 and C19 outlets, dual L6-30P inputs

CyberPower

CyberPower PDU44007 Switched ATS PDU 2U 30A 16×C13 2×C19 L6-30R

SKU CH-8DT0-G43JR MPN PDU44007

Switched 2U rack PDU with automatic transfer switching, 16 C13 and 2 C19 outlets, dual L6-30P inputs, and remote monitoring

  • TypeSwitched
  • Rack Size2U
  • StyleRackmount
  • Input Voltage240 – 200 VAC
  • Input Frequency50 Hz – 60 Hz
  • Maximum Input Current30A
  • Automatic transfer switching ensures continuous power supply
  • Sixteen C13 and two C19 outlets connect diverse rack equipment
  • Two NEMA L6-30P inputs provide redundant power feeds
  • Switchable outlets enable remote power cycling per device
  • Selectable colour LCD gives clear local status at a glance

Switched ATS PDU for rack power

The CyberPower PDU44007 is a switched automatic transfer switch power distribution unit built for 2U rackmount installations. It accepts dual 240–200 VAC feeds through two NEMA L6-30P plugs and delivers power through sixteen C13, two C19 and one L6-30R outlets. The unit is designed for data-centre and server-room environments that require redundant input sources and remote outlet control.

Replaces basic PDUs without transfer switching

This unit upgrades installations that rely on a single power feed or on non-switched distribution strips. The automatic transfer switch moves the load to the secondary source within milliseconds when the primary feed fails, while switchable outlets let administrators reboot individual devices remotely. The jump is worth it when uptime demands redundant inputs and when outlet-level power cycling reduces physical site visits.

Sustained load behaviour in 45 °C ambient

Dual 20 A branch breakers protect the outlet groups during continuous operation at the 24 A derated input rating. The selectable colour LCD reports real-time current, voltage and power factor per phase, and firmware upgrades can be applied without removing the unit from the rack. Operating temperature is rated up to 45 °C with non-condensing humidity to 95 %, so thermal headroom remains predictable under prolonged full-load conditions.

Priekšrocības

  • Automatic transfer switching ensures continuous power supply
  • Sixteen C13 and two C19 outlets connect diverse rack equipment
  • Two NEMA L6-30P inputs provide redundant power feeds
  • Switchable outlets enable remote power cycling per device
  • Selectable colour LCD gives clear local status at a glance

Specifikācijas

BrandCyberPower
SeriesSwitched ATS PDU
ModelPDU44007
Part NumberPDU44007
TypeSwitched
Rack Size2U
StyleRackmount
Input Voltage240 – 200 VAC
Input Frequency50 Hz – 60 Hz
Maximum Input Current30A
Regulatory Derated Input Current24 A
Input Connector(s)2 x NEMA L6-30P
Cord Length10 ft (3.0 m)
Output Voltage240 – 200 VAC
Output Connector(s)16 – IEC-320 C13
2 – IEC-320 C19
1 – NEMA L6-30R
Overload Protection20A x 2
Operating Environment32 – 113 °F (0 – 45 °C)
Operating Relative Humidity0 – 95 % (non-condensing)
Operating Elevation0 – 13123 ft (0 – 4000 m)
Storage Temperature5 – 131 °F (-15 – 55 °C)
Storage Elevation0 – 49213 ft (0 – 14999 m)
Dimensions17.05 x 3.5 x 8.45 (in)
Weight17.6 lb
Sūtījuma svars9.39 kg
Sūtījuma izmēri550 × 398 × 185 mm

Jautājumi par šo preci

What rack depth and clearance does the 17.05 x 3.5 x 8.45 inch 2U chassis require?

The unit fits a standard 19-inch rack with 2U height; allow at least 8.45 inches of depth behind the mounting rails plus cable bend radius for the 10 ft input cords.

How are the dual NEMA L6-30P input cords connected to enable automatic transfer switching?

Plug each L6-30P into separate 30 A 200–240 VAC circuits; the ATS logic then monitors both sources and transfers load within milliseconds when one fails.

When should the internal 20 A x 2 branch circuit breakers be inspected or replaced?

Check breaker operation annually or after any overload trip; replace a breaker that will not stay reset or shows discoloration, as the PDU has no user-serviceable fuses.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.