DARKROCK
DARKROCK F120 3in1 120mm Infinite Mirror Case Fans White
Three white 120 mm case fans with infinite-mirror ARGB lighting, hydraulic bearings, 800–1600 RPM PWM control, 46.7 CFM airflow at 27.7 dBA.
- Fan ControllerController, Remote
- TypeCase Fan
- CompatibilityCase
- Fan Thickness25mm
- Bearing TypeHydro Bearing
- RPM800-1600 RPM
- Infinite mirror ARGB on blades and frame
- 7 CFM airflow at 1600 RPM PWM speed
- Hydraulic bearing with rubber pads for 27.7 dBA noise
- Hub controls ten PWM and ten ARGB fans via remote
- SATA-powered hub adds 20 ports for expansion
120 mm infinite-mirror fan kit
The kit contains three 120 mm white fans with an infinity-mirror centre and ARGB lighting on both blades and frame. A supplied controller hub adds 10 PWM and 10 ARGB ports plus a remote for speed and colour adjustments. Hydraulic bearings and eight rubber pads keep noise to 27.7 dBA at peak speed. The fans push up to 46.7 CFM across an 800–1600 RPM range.
Who benefits and who should look elsewhere
Builders wanting synchronised ARGB lighting and centralised fan control for up to ten devices will find the hub and remote convenient. Systems that rely on motherboard-only fan headers or lack a SATA power connection cannot use the hub’s full PWM and ARGB capacity. Users who prefer monochrome or non-illustrated fans should consider other models.
Deciding specification: 20-port controller hub
The included hub provides ten 4-pin PWM ports and ten 5 V 3-pin ARGB ports powered through dual SATA connectors, letting a single remote manage speed and lighting for up to ten fans. This consolidated control is the feature that determines whether the kit matches a build’s cooling and lighting architecture.
Priekšrocības
- Infinite mirror ARGB on blades and frame
- 7 CFM airflow at 1600 RPM PWM speed
- Hydraulic bearing with rubber pads for 27.7 dBA noise
- Hub controls ten PWM and ten ARGB fans via remote
- SATA-powered hub adds 20 ports for expansion
Specifikācijas
| Brand | DARKROCK |
|---|---|
| Fan Controller | Controller, Remote |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 800-1600 RPM |
| Air Flow | 46.7 CFM (Max) |
| Noise Level | 27.7 dBA (Max) |
| Power Connector | 4 Pin |
| Color | White |
| Dimensions | 120 x 120 x 25mm |
Jautājumi par šo preci
Does the included controller hub need a SATA power cable from the PSU to run the three fans?
Yes, the hub draws its power through a SATA connector from the power supply, so a free SATA power lead is required.
Can I keep my existing 4-pin PWM fans and control them through the same remote?
The hub provides ten 4-pin PWM ports, so additional PWM fans can be connected and their speeds adjusted via the remote.
How do I confirm the ARGB lighting is synchronised across all three fans after installation?
Each fan has 24 addressable LEDs; when the hub’s 5 V 3-pin ARGB ports are linked, the remote cycles colours across all fans simultaneously.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001037BTC
Krājumā