Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Three white 120mm case fans with infinite mirror centres and ARGB lighting on blades and frame, plus a controller hub and remote

DARKROCK

DARKROCK F120 3in1 120mm Infinite Mirror Case Fans White

SKU CH-NPQV-QHAPJ

Three white 120 mm case fans with infinite-mirror ARGB lighting, hydraulic bearings, 800–1600 RPM PWM control, 46.7 CFM airflow at 27.7 dBA.

  • Fan ControllerController, Remote
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM800-1600 RPM
  • Infinite mirror ARGB on blades and frame
  • 7 CFM airflow at 1600 RPM PWM speed
  • Hydraulic bearing with rubber pads for 27.7 dBA noise
  • Hub controls ten PWM and ten ARGB fans via remote
  • SATA-powered hub adds 20 ports for expansion

120 mm infinite-mirror fan kit

The kit contains three 120 mm white fans with an infinity-mirror centre and ARGB lighting on both blades and frame. A supplied controller hub adds 10 PWM and 10 ARGB ports plus a remote for speed and colour adjustments. Hydraulic bearings and eight rubber pads keep noise to 27.7 dBA at peak speed. The fans push up to 46.7 CFM across an 800–1600 RPM range.

Who benefits and who should look elsewhere

Builders wanting synchronised ARGB lighting and centralised fan control for up to ten devices will find the hub and remote convenient. Systems that rely on motherboard-only fan headers or lack a SATA power connection cannot use the hub’s full PWM and ARGB capacity. Users who prefer monochrome or non-illustrated fans should consider other models.

Deciding specification: 20-port controller hub

The included hub provides ten 4-pin PWM ports and ten 5 V 3-pin ARGB ports powered through dual SATA connectors, letting a single remote manage speed and lighting for up to ten fans. This consolidated control is the feature that determines whether the kit matches a build’s cooling and lighting architecture.

Přednosti

  • Infinite mirror ARGB on blades and frame
  • 7 CFM airflow at 1600 RPM PWM speed
  • Hydraulic bearing with rubber pads for 27.7 dBA noise
  • Hub controls ten PWM and ten ARGB fans via remote
  • SATA-powered hub adds 20 ports for expansion

Specifikace

BrandDARKROCK
Fan ControllerController, Remote
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM800-1600 RPM
Air Flow46.7 CFM (Max)
Noise Level27.7 dBA (Max)
Power Connector4 Pin
ColorWhite
Dimensions120 x 120 x 25mm

Otázky k tomuto produktu

Does the included controller hub need a SATA power cable from the PSU to run the three fans?

Yes, the hub draws its power through a SATA connector from the power supply, so a free SATA power lead is required.

Can I keep my existing 4-pin PWM fans and control them through the same remote?

The hub provides ten 4-pin PWM ports, so additional PWM fans can be connected and their speeds adjusted via the remote.

How do I confirm the ARGB lighting is synchronised across all three fans after installation?

Each fan has 24 addressable LEDs; when the hub’s 5 V 3-pin ARGB ports are linked, the remote cycles colours across all fans simultaneously.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.