Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
A silver 3.5 inch SAS hard drive mounted in a black server tray

DELL

DELL 2TB 7.2K SAS 3.5" 12Gb/s HDD 13 GEN with tray internal hard drive

SKU CH-1EXS-GWWD4

Stores 2 TB of enterprise data on a 3.5-inch SAS drive spinning at 7.2 K RPM with a 12 Gb/s interface, supplied with a tray for 13 GEN PowerEdge servers

  • 2 TB capacity stores large enterprise data sets
  • SAS 12 Gb/s interface enables high-speed data transfer
  • 2 K RPM spindle speed provides consistent performance
  • 5 inch LFF form factor fits compatible PowerEdge servers
  • Includes tray for direct installation in supported systems

2 TB 12 Gb/s SAS hard drive

This Dell 2 TB hard drive uses a 12 Gb/s SAS interface and spins at 7.2K RPM in a 3.5-inch form factor. It ships new with a tray and PSID support for the 13 generation of compatible servers.

Suited for PowerEdge R230 R330 R430 R530 R730

This drive fits the listed PowerEdge rack and tower models that accept 3.5-inch SAS drives with a tray. Builders whose chassis only takes 2.5-inch bays or a different interface should look elsewhere.

12 Gb/s SAS interface

The single specification that decides compatibility is the 12 Gb/s SAS interface combined with the 3.5-inch tray. Verify that your server backplane and controller support this exact interface before ordering.

Priekšrocības

  • 2 TB capacity stores large enterprise data sets
  • SAS 12 Gb/s interface enables high-speed data transfer
  • 2 K RPM spindle speed provides consistent performance
  • 5 inch LFF form factor fits compatible PowerEdge servers
  • Includes tray for direct installation in supported systems

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

What server backplane or controller do I need for the 12Gb/s SAS interface on this 3.5" drive?

A 12Gb/s SAS backplane or HBA in a PowerEdge 13th-generation chassis (R230, R330, R430, R530, R730, R730XD, T330, T430, T630) provides the required connection and power.

Will this 7.2K RPM SAS drive work in a PowerEdge R730 that currently runs 10K SAS drives?

Yes, the drive shares the same 12Gb/s SAS interface and 3.5" form factor, so it installs in the same bays; the array will run at the speed of the slowest spindle.

How can I confirm the 12Gb/s link is active after installing the drive in a 13 GEN server?

Check the controller BIOS or iDRAC — the drive should report a negotiated 12Gb/s SAS link and appear with its full 2TB capacity.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.