Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
A silver 3.5 inch SAS hard drive mounted in a black server tray

DELL

DELL 2TB 7.2K SAS 3.5" 12Gb/s HDD 13 GEN with tray internal hard drive

SKU CH-1EXS-GWWD4

Stores 2 TB of enterprise data on a 3.5-inch SAS drive spinning at 7.2 K RPM with a 12 Gb/s interface, supplied with a tray for 13 GEN PowerEdge servers

  • 2 TB capacity stores large enterprise data sets
  • SAS 12 Gb/s interface enables high-speed data transfer
  • 2 K RPM spindle speed provides consistent performance
  • 5 inch LFF form factor fits compatible PowerEdge servers
  • Includes tray for direct installation in supported systems

2 TB 12 Gb/s SAS hard drive

This Dell 2 TB hard drive uses a 12 Gb/s SAS interface and spins at 7.2K RPM in a 3.5-inch form factor. It ships new with a tray and PSID support for the 13 generation of compatible servers.

Suited for PowerEdge R230 R330 R430 R530 R730

This drive fits the listed PowerEdge rack and tower models that accept 3.5-inch SAS drives with a tray. Builders whose chassis only takes 2.5-inch bays or a different interface should look elsewhere.

12 Gb/s SAS interface

The single specification that decides compatibility is the 12 Gb/s SAS interface combined with the 3.5-inch tray. Verify that your server backplane and controller support this exact interface before ordering.

Poudarki

  • 2 TB capacity stores large enterprise data sets
  • SAS 12 Gb/s interface enables high-speed data transfer
  • 2 K RPM spindle speed provides consistent performance
  • 5 inch LFF form factor fits compatible PowerEdge servers
  • Includes tray for direct installation in supported systems

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

What server backplane or controller do I need for the 12Gb/s SAS interface on this 3.5" drive?

A 12Gb/s SAS backplane or HBA in a PowerEdge 13th-generation chassis (R230, R330, R430, R530, R730, R730XD, T330, T430, T630) provides the required connection and power.

Will this 7.2K RPM SAS drive work in a PowerEdge R730 that currently runs 10K SAS drives?

Yes, the drive shares the same 12Gb/s SAS interface and 3.5" form factor, so it installs in the same bays; the array will run at the speed of the slowest spindle.

How can I confirm the 12Gb/s link is active after installing the drive in a 13 GEN server?

Check the controller BIOS or iDRAC — the drive should report a negotiated 12Gb/s SAS link and appear with its full 2TB capacity.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.