SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
DELL
1 TB enterprise desktop hard drive with 7200 RPM speed and SATA 3.0Gb/s interface
The Dell 50XV4 is a 1 TB 3.5 inch internal hard drive that spins at 7200 RPM and connects through a SATA 3.0Gb/s interface. It is supplied as a bare drive in ESD protective packaging and carries a 90 day TekBoost warranty. The unit is tested before shipment and is intended for desktop systems that accept a 3.5 inch SATA drive.
This drive suits users who need a 1 TB capacity with a 7200 RPM spindle speed and a SATA 3.0Gb/s connection. It is not for systems that require a 2.5 inch form factor, a higher interface transfer rate, or a drive tray included in the package. Builders who need a different capacity or a faster SATA revision should consider other options.
The single specification that determines fit is the SATA 3.0Gb/s interface combined with the 3.5 inch form factor. Only motherboards or controllers with a matching SATA port and a 3.5 inch drive bay can accept this drive. Verify the host interface and bay size before purchase.
| Brand | Dell |
|---|---|
| Model | 50XV4 |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
The 7200 RPM spindle speed and 3.5" form factor mean the drive will draw more power and generate more heat than a 2.5" or lower-RPM model; ensure your case airflow and power supply can handle the additional load.
You need a standard SATA data cable and a motherboard or controller with a SATA 3.0Gb/s (SATA II) port; the drive is supplied as a bare unit without cables or mounting tray.
The drive uses a SATA 3.0Gb/s interface, so it cannot share an IDE channel; you must connect it to a separate SATA port on the motherboard or a SATA controller card.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?