DELL
DELL 50XV4 1TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
1 TB enterprise desktop hard drive with 7200 RPM speed and SATA 3.0Gb/s interface
- PackagingBare Drive
- InterfaceSATA 3.0Gb/s
- Capacity1TB
- RPM7200 RPM
- Form Factor3.5"
- 1 TB capacity for bulk storage
- 7200 RPM spindle for quick data access
- SATA 3.0Gb/s interface for broad compatibility
- 5-inch form factor fits standard desktop bays
- Enterprise-class design built for continuous operation
Dell 50XV4 1 TB 7200 RPM SATA drive
The Dell 50XV4 is a 1 TB 3.5 inch internal hard drive that spins at 7200 RPM and connects through a SATA 3.0Gb/s interface. It is supplied as a bare drive in ESD protective packaging and carries a 90 day TekBoost warranty. The unit is tested before shipment and is intended for desktop systems that accept a 3.5 inch SATA drive.
Suitable for storage upgrades in compatible desktops
This drive suits users who need a 1 TB capacity with a 7200 RPM spindle speed and a SATA 3.0Gb/s connection. It is not for systems that require a 2.5 inch form factor, a higher interface transfer rate, or a drive tray included in the package. Builders who need a different capacity or a faster SATA revision should consider other options.
SATA 3.0Gb/s interface
The single specification that determines fit is the SATA 3.0Gb/s interface combined with the 3.5 inch form factor. Only motherboards or controllers with a matching SATA port and a 3.5 inch drive bay can accept this drive. Verify the host interface and bay size before purchase.
Přednosti
- 1 TB capacity for bulk storage
- 7200 RPM spindle for quick data access
- SATA 3.0Gb/s interface for broad compatibility
- 5-inch form factor fits standard desktop bays
- Enterprise-class design built for continuous operation
Specifikace
| Brand | Dell |
|---|---|
| Model | 50XV4 |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Otázky k tomuto produktu
How much power does the 7200 RPM 3.5" drive draw during all-day operation?
The 7200 RPM spindle speed and 3.5" form factor mean the drive will draw more power and generate more heat than a 2.5" or lower-RPM model; ensure your case airflow and power supply can handle the additional load.
What cable and controller does the SATA 3.0Gb/s interface require?
You need a standard SATA data cable and a motherboard or controller with a SATA 3.0Gb/s (SATA II) port; the drive is supplied as a bare unit without cables or mounting tray.
Will the 1TB 7200 RPM drive work as a secondary store alongside an older IDE drive?
The drive uses a SATA 3.0Gb/s interface, so it cannot share an IDE channel; you must connect it to a separate SATA port on the motherboard or a SATA controller card.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



