Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
White 3D printing pen with ceramic nozzle and filament spools

DEWANG

DEWANG 3D Printing Pen White 1.75mm PLA 30m

SKU CH-N0F0-0VZG7

A 3D drawing pen with a 0.7 mm ceramic nozzle, three speed settings and 30 m of 1.75 mm PLA filament included

  • Type3D Printing Pen
  • ColorWhite
  • Safe creative play for children with non-toxic PLA filament
  • Adjustable flow control via three-speed settings for precise drawing
  • Comfortable extended use with ceramic nozzle and heat-sink design
  • Ready to create immediately with 30 m of PLA filament included
  • Reliable one-button operation tested for 3000 cycles

Creative Tool for Young Makers

The DEWANG 3D printing pen is a handheld extruder designed for children and beginners to create three-dimensional drawings and models. It feeds 1.75 mm PLA filament through a 0.7 mm ceramic nozzle at temperatures between 190 and 210 degrees. The white ABS shell measures 185 by 43 by 29 mm and includes a pen base for stable storage between sessions.

Power and Speed Constraints

Operation requires the supplied 5V 2A AC/DC adapter with an EU plug; the pen has no internal battery and cannot run from a standard USB port alone. A single button controls power and cycles through three extrusion speeds, while a separate key handles filament loading and retraction. The switch is rated for 3000 presses and heat-sink holes around the nozzle carry an anti-scalding warning.

Filament Capacity and Practical Limits

The package includes 30 metres of PLA split into three 10-metre spools of random colours, enough for many small figures or decorative pieces. PLA prints at the lower end of the temperature range and cools quickly, but the pen cannot process materials requiring higher heat or different diameters. Complex, large-scale structures will exhaust the included filament and demand additional spools.

Priekšrocības

  • Safe creative play for children with non-toxic PLA filament
  • Adjustable flow control via three-speed settings for precise drawing
  • Comfortable extended use with ceramic nozzle and heat-sink design
  • Ready to create immediately with 30 m of PLA filament included
  • Reliable one-button operation tested for 3000 cycles

Specifikācijas

Type3D Printing Pen
ColorWhite

Jautājumi par šo preci

Is the included 30 m of PLA filament enough for a beginner to start with?

The pack supplies 30 m of 1.75 mm PLA split into three 10 m colours, which is a generous starter amount for learning the pen.

What does the 190–210 temperature range mean when I am actually drawing?

It is the nozzle operating window in degrees Celsius; the pen heats within that band so PLA melts smoothly without burning.

The pen runs on a 5 V 2 A adapter — does that limit how fast I can extrude?

The 5 V 2 A input powers the three-speed motor; higher speed settings extrude faster but stay within the adapter’s capacity.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.