NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
DoDo DIY
Replacement X99 LGA2011 board for HP Envy 850 and 860 series systems, includes I/O shield
This DoDo DIY IPM99-VK motherboard is a direct replacement for HP Envy 850 and 860 series desktops including the 850-060SE, 850-065SE, 850-070ST and 860-160SE models. It uses the X99 chipset and LGA2011 socket to support compatible Intel processors. The package includes the board and an I/O shield for a complete swap. Builders repairing these specific HP units will find the correct fit and mounting points.
The single specification that decides compatibility is the LGA2011 socket paired with the Intel X99 chipset. Only CPUs designed for this exact socket and chipset combination will function. The supplier notes that single-sided memory modules are not supported on most boards of this type. Buyers must verify their processor matches LGA2011 and that their memory is double-sided before purchasing.
The board draws power through standard ATX and CPU connectors to run the X99 platform and installed processor. System thermals and noise depend entirely on the cooler, case airflow and power supply chosen for the HP Envy chassis. No onboard fan headers or thermal limits are detailed in the data. The board itself adds no active cooling so acoustic and thermal performance mirrors the original HP design when reused with stock components.
Šai precei pagaidām nav publicētu specifikāciju.
The X99 chipset on this IPM99-VK board is the direct replacement for the original 793186-001, 793186-501 and 793186-601 parts used in HP Envy 850-060SE, 850-065SE, 850-070ST and 860-160SE desktops, restoring full LGA2011 processor and memory support exactly as the factory board did.
This board carries HP part numbers 793186-001, 793186-501 and 793186-601, so the LGA2011 socket lines up with the original CPU mounting holes and cooler retention brackets on Envy 850 and 860 chassis.
The board follows the exact mounting-hole pattern and I/O shield cut-out of the factory 793186 series, so it fits the existing standoffs, rear-panel opening and front-panel header positions in Envy 850-060SE, 850-065SE, 850-070ST and 860-160SE cases without modification.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?