We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular ATX motherboard with silver CPU socket, black expansion slots and rear I/O shield

DoDo DIY

DoDo DIY IPM99-VK X99 LGA2011 Intel motherboard

SKU CH-R730-4566M

Replacement X99 LGA2011 board for HP Envy 850 and 860 series systems, includes I/O shield

  • Replacement motherboard for HP ENVY 850 and 860 series desktops
  • Direct fit for models 850-060SE, 850-065SE, 850-070ST and 860-160SE
  • X99 chipset with LGA2011 socket supports compatible Intel CPUs
  • Includes I/O shield for clean rear-panel installation
  • Part numbers 793186-001, 793186-501 and 793186-601 match original HP boards

HP Envy desktop replacement board

This DoDo DIY IPM99-VK motherboard is a direct replacement for HP Envy 850 and 860 series desktops including the 850-060SE, 850-065SE, 850-070ST and 860-160SE models. It uses the X99 chipset and LGA2011 socket to support compatible Intel processors. The package includes the board and an I/O shield for a complete swap. Builders repairing these specific HP units will find the correct fit and mounting points.

LGA2011 socket and X99 chipset

The single specification that decides compatibility is the LGA2011 socket paired with the Intel X99 chipset. Only CPUs designed for this exact socket and chipset combination will function. The supplier notes that single-sided memory modules are not supported on most boards of this type. Buyers must verify their processor matches LGA2011 and that their memory is double-sided before purchasing.

Thermals noise and power in normal use

The board draws power through standard ATX and CPU connectors to run the X99 platform and installed processor. System thermals and noise depend entirely on the cooler, case airflow and power supply chosen for the HP Envy chassis. No onboard fan headers or thermal limits are detailed in the data. The board itself adds no active cooling so acoustic and thermal performance mirrors the original HP design when reused with stock components.

Highlights

  • Replacement motherboard for HP ENVY 850 and 860 series desktops
  • Direct fit for models 850-060SE, 850-065SE, 850-070ST and 860-160SE
  • X99 chipset with LGA2011 socket supports compatible Intel CPUs
  • Includes I/O shield for clean rear-panel installation
  • Part numbers 793186-001, 793186-501 and 793186-601 match original HP boards

Specifications

No published specifications for this item yet.

Questions about this item

What does the X99 chipset on the IPM99-VK actually deliver in a working HP Envy 850 or 860 system?

The X99 chipset on this IPM99-VK board is the direct replacement for the original 793186-001, 793186-501 and 793186-601 parts used in HP Envy 850-060SE, 850-065SE, 850-070ST and 860-160SE desktops, restoring full LGA2011 processor and memory support exactly as the factory board did.

Which HP part numbers does the LGA2011 socket on this board match?

This board carries HP part numbers 793186-001, 793186-501 and 793186-601, so the LGA2011 socket lines up with the original CPU mounting holes and cooler retention brackets on Envy 850 and 860 chassis.

What physical clearance does the IPM99-VK need inside an Envy 850 or 860 case?

The board follows the exact mounting-hole pattern and I/O shield cut-out of the factory 793186 series, so it fits the existing standoffs, rear-panel opening and front-panel header positions in Envy 850-060SE, 850-065SE, 850-070ST and 860-160SE cases without modification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.