EZ Dupe USB Pantera Duplicator 1-7 35MB/s 128M
- USB Flash Drive Dup…
- 1 to 7
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
EZ Dupe, Inc.
Copies up to 31 USB drives at 35 MB/s each with four copy modes and DoD 5220.22 compliant erasing
Target 1 to 31
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
The EZ Dupe USB Pantera is a standalone flash-media duplicator that copies up to 31 USB thumb drives simultaneously. Each port operates independently at up to 35 MB/s, delivering 2 GB per minute without a host computer. It suits IT departments, duplication houses or forensic teams that need secure, high-volume cloning without tying up a PC.
The unit runs as a standalone appliance, so it draws power only for its own controller and the 31 active USB ports. No host-system overhead is added, and the 128 MB buffer helps sustain steady throughput. Because no PC is required, acoustic output stays limited to the duplicator’s internal cooling, keeping the workspace quiet during long batch jobs.
Four copy modes — Quick Copy, Whole Media, All Partitioned and Percentage Copy — let operators choose between speed and bit-for-bit fidelity. Four erase modes include Quick Erase, Full Erase and DoD 3-pass and 7-pass sanitisation compliant with the 5220.22 standard. These built-in functions remove the need for external software licences and keep sensitive media on-site.
| Type | USB Flash Drive Duplicator |
|---|---|
| Target | 1 to 31 |
| Buffer Memory | 128M |
| Data Transfer Rate | 2GB/min |
| Operating Type | Standalone |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Place the unit on a stable surface, connect the power cord, insert the master USB drive into the source port and up to 31 target drives into the target ports, then power on; the step often missed is verifying every target drive is fully seated so each port can reach its 35 MB/s independent speed.
The 128 MB buffer memory and internal controller are solid-state with no user-serviceable parts; the only items that wear are the USB port springs, which should be inspected periodically and replaced by a technician if insertion feels loose.
The 35 MB/s per-port throughput ceiling is reached before the 128 MB buffer fills, so sustained runs are gated by the speed of the target USB drives rather than the duplicator itself.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?