EZ Dupe USB Pantera Duplicator 1-7 35MB/s 128M
- USB Flash Drive Dup…
- 1 to 7
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
EZ Dupe, Inc.
Copies up to 31 USB drives at 35 MB/s each with four copy modes and DoD 5220.22 compliant erasing
Target 1 to 31
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
The EZ Dupe USB Pantera is a standalone flash-media duplicator that copies up to 31 USB thumb drives simultaneously. Each port operates independently at up to 35 MB/s, delivering 2 GB per minute without a host computer. It suits IT departments, duplication houses or forensic teams that need secure, high-volume cloning without tying up a PC.
The unit runs as a standalone appliance, so it draws power only for its own controller and the 31 active USB ports. No host-system overhead is added, and the 128 MB buffer helps sustain steady throughput. Because no PC is required, acoustic output stays limited to the duplicator’s internal cooling, keeping the workspace quiet during long batch jobs.
Four copy modes — Quick Copy, Whole Media, All Partitioned and Percentage Copy — let operators choose between speed and bit-for-bit fidelity. Four erase modes include Quick Erase, Full Erase and DoD 3-pass and 7-pass sanitisation compliant with the 5220.22 standard. These built-in functions remove the need for external software licences and keep sensitive media on-site.
| Type | USB Flash Drive Duplicator |
|---|---|
| Target | 1 to 31 |
| Buffer Memory | 128M |
| Data Transfer Rate | 2GB/min |
| Operating Type | Standalone |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Place the unit on a stable surface, connect the power cord, insert the master USB drive into the source port and up to 31 target drives into the target ports, then power on; the step often missed is verifying every target drive is fully seated so each port can reach its 35 MB/s independent speed.
The 128 MB buffer memory and internal controller are solid-state with no user-serviceable parts; the only items that wear are the USB port springs, which should be inspected periodically and replaced by a technician if insertion feels loose.
The 35 MB/s per-port throughput ceiling is reached before the 128 MB buffer fills, so sustained runs are gated by the speed of the target USB drives rather than the duplicator itself.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?