Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

EZ Dupe, Inc.

EZ Dupe Media Mirror Plus BD M1003-SSPBD 1 to 3 Duplicator

SKU CH-CDT4-X9D4C

Standalone duplicator copies between flash media and Blu-ray, DVD or CD discs at up to three targets simultaneously

  • TypeMultimedia Duplicator
  • Target1 to 3
  • Buffer Memory128M
  • Supported MediaCD / DVD / Blu-Ray / USB / SD / CF / MMS
  • Operating TypeStandalone
  • Load TypeSlot

Option Media Mirror Plus Blu-Ray

  • Standalone operation removes the need for a host computer
  • 128 MB buffer memory maintains steady copy throughput
  • Copies one source disc to three targets simultaneously
  • Reads USB, SD, CF and Memory Stick slots
  • AC 115-230 V 50/60 Hz power fits global mains

Standalone multimedia duplicator

The EZ Dupe Media Mirror Plus BD M1003-SSPBD is a standalone duplicator that copies between flash media and optical discs without a host computer. It accepts USB drives, SD, CompactFlash and Memory Stick cards alongside CD, DVD and Blu-ray media. The unit operates on 115-230 V AC power at 50 or 60 Hz and includes 128M of buffer memory for stable transfers.

Sustained copy operation

Because the device runs independently of a PC, copy speed remains consistent for the duration of each job rather than fluctuating with host-system load. The internal buffer absorbs momentary variations between source and target devices so that extended multi-disc runs proceed without interruption. Standalone operation also eliminates software overhead that can throttle throughput during long sessions.

Media-to-media limits

The duplicator supports one-to-one flash-to-flash copies and one-to-four flash-to-disc copies, while disc-to-disc jobs are limited to three targets of identical format and size. Multi-session technology allows several flash cards to be combined onto a single optical disc, but the source and destination capacities must match to avoid space warnings. No computer connection is required for any mode.

Priekšrocības

  • Standalone operation removes the need for a host computer
  • 128 MB buffer memory maintains steady copy throughput
  • Copies one source disc to three targets simultaneously
  • Reads USB, SD, CF and Memory Stick slots
  • AC 115-230 V 50/60 Hz power fits global mains

Specifikācijas

BrandEZ Dupe
ModelMedia Mirror Plus BD
Part NumberM1003-SSPBD
TypeMultimedia Duplicator
Target1 to 3
Buffer Memory128M
Supported MediaCD / DVD / Blu-Ray / USB / SD / CF / MMS
Operating TypeStandalone
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much power does the M1003-SSPBD draw when running continuously?

The duplicator accepts AC 115-230 V at 50/60 Hz and operates standalone without a host computer, so power draw stays at the level required for the internal drive and controller during copy jobs.

What source media must I already have to start copying?

You need a source disc (CD-R, DVD-R, DVD+R or BD-R) or a flash device (USB drive, SD, CF or Memory Stick card) inserted in the appropriate reader slot.

Can I copy a Blu-ray master to older DVD blanks in the three target bays?

Disc-to-disc copies require the same disc format and size to avoid a "Not Enough Space" warning, so a Blu-ray master cannot be written to DVD blanks.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.