Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

EZ Dupe, Inc.

EZ Dupe Media Mirror Plus BD M1003-SSPBD 1 to 3 Duplicator

SKU CH-CDT4-X9D4C

Standalone duplicator copies between flash media and Blu-ray, DVD or CD discs at up to three targets simultaneously

  • TypeMultimedia Duplicator
  • Target1 to 3
  • Buffer Memory128M
  • Supported MediaCD / DVD / Blu-Ray / USB / SD / CF / MMS
  • Operating TypeStandalone
  • Load TypeSlot

Option Media Mirror Plus Blu-Ray

  • Standalone operation removes the need for a host computer
  • 128 MB buffer memory maintains steady copy throughput
  • Copies one source disc to three targets simultaneously
  • Reads USB, SD, CF and Memory Stick slots
  • AC 115-230 V 50/60 Hz power fits global mains

Standalone multimedia duplicator

The EZ Dupe Media Mirror Plus BD M1003-SSPBD is a standalone duplicator that copies between flash media and optical discs without a host computer. It accepts USB drives, SD, CompactFlash and Memory Stick cards alongside CD, DVD and Blu-ray media. The unit operates on 115-230 V AC power at 50 or 60 Hz and includes 128M of buffer memory for stable transfers.

Sustained copy operation

Because the device runs independently of a PC, copy speed remains consistent for the duration of each job rather than fluctuating with host-system load. The internal buffer absorbs momentary variations between source and target devices so that extended multi-disc runs proceed without interruption. Standalone operation also eliminates software overhead that can throttle throughput during long sessions.

Media-to-media limits

The duplicator supports one-to-one flash-to-flash copies and one-to-four flash-to-disc copies, while disc-to-disc jobs are limited to three targets of identical format and size. Multi-session technology allows several flash cards to be combined onto a single optical disc, but the source and destination capacities must match to avoid space warnings. No computer connection is required for any mode.

I korthet

  • Standalone operation removes the need for a host computer
  • 128 MB buffer memory maintains steady copy throughput
  • Copies one source disc to three targets simultaneously
  • Reads USB, SD, CF and Memory Stick slots
  • AC 115-230 V 50/60 Hz power fits global mains

Specifikationer

BrandEZ Dupe
ModelMedia Mirror Plus BD
Part NumberM1003-SSPBD
TypeMultimedia Duplicator
Target1 to 3
Buffer Memory128M
Supported MediaCD / DVD / Blu-Ray / USB / SD / CF / MMS
Operating TypeStandalone
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How much power does the M1003-SSPBD draw when running continuously?

The duplicator accepts AC 115-230 V at 50/60 Hz and operates standalone without a host computer, so power draw stays at the level required for the internal drive and controller during copy jobs.

What source media must I already have to start copying?

You need a source disc (CD-R, DVD-R, DVD+R or BD-R) or a flash device (USB drive, SD, CF or Memory Stick card) inserted in the appropriate reader slot.

Can I copy a Blu-ray master to older DVD blanks in the three target bays?

Disc-to-disc copies require the same disc format and size to avoid a "Not Enough Space" warning, so a Blu-ray master cannot be written to DVD blanks.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.