BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
G.SKILL
16 GB dual-channel DDR3 kit at 1600 MHz with CL11 timing and 1.50 V operation
This kit provides 16GB of DDR3 memory in a matched pair of 8GB modules. It is rated for 1600 speed and CL11 latency at 1.50V. The dual-channel configuration suits Intel Core i7, i5, i3 and AMD AM3, Llano or AM3+ desktop platforms.
A gamer-styled heat spreader covers each module to aid thermal management. The rated timing of 11-11-11-28 delivers 12.8GBps bandwidth per channel on a compatible board. No extra software or accessories are included beyond the two memory sticks.
Builders refreshing an older DDR3 system gain a straightforward capacity and speed increase. Systems that require ECC, registered modules or a different DDR generation will not accept this kit. Check your motherboard manual for supported speeds and maximum capacity before purchasing.
| Brand | G.SKILL |
|---|---|
| Series | AEGIS |
| Model | F3-1600C11D-16GIS |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11-28 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Features | Solid performance gaming memory designed for gamers. Compatible with both Intel Core i7, i5, i3 systems & AMD AM3/Llano/AM3+ platforms. |
| Sūtījuma svars | 0.07 kg |
| Sūtījuma izmēri | 152 × 121 × 15 mm |
The kit is DDR3 1600 (PC3 12800) unbuffered non-ECC memory, the standard desktop DDR3 form factor. It installs in any board with DDR3 slots that accepts 1.50 V modules.
Most boards default to a lower DDR3 speed. Enable the XMP or DOCP profile in BIOS to run at 1600 MHz with timings 11-11-11-28 at 1.50 V.
In dual-channel mode the kit delivers up to 12.8 GB/s total bandwidth, doubling the single-channel throughput on a compatible platform.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?