BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
G.SKILL
16 GB dual-channel DDR3 kit at 1600 MHz with CL11 timing and 1.50 V operation
This kit provides 16GB of DDR3 memory in a matched pair of 8GB modules. It is rated for 1600 speed and CL11 latency at 1.50V. The dual-channel configuration suits Intel Core i7, i5, i3 and AMD AM3, Llano or AM3+ desktop platforms.
A gamer-styled heat spreader covers each module to aid thermal management. The rated timing of 11-11-11-28 delivers 12.8GBps bandwidth per channel on a compatible board. No extra software or accessories are included beyond the two memory sticks.
Builders refreshing an older DDR3 system gain a straightforward capacity and speed increase. Systems that require ECC, registered modules or a different DDR generation will not accept this kit. Check your motherboard manual for supported speeds and maximum capacity before purchasing.
| Brand | G.SKILL |
|---|---|
| Series | AEGIS |
| Model | F3-1600C11D-16GIS |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11-28 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Features | Solid performance gaming memory designed for gamers. Compatible with both Intel Core i7, i5, i3 systems & AMD AM3/Llano/AM3+ platforms. |
| Lähetyspaino | 0.07 kg |
| Pakkauksen mitat | 152 × 121 × 15 mm |
The kit is DDR3 1600 (PC3 12800) unbuffered non-ECC memory, the standard desktop DDR3 form factor. It installs in any board with DDR3 slots that accepts 1.50 V modules.
Most boards default to a lower DDR3 speed. Enable the XMP or DOCP profile in BIOS to run at 1600 MHz with timings 11-11-11-28 at 1.50 V.
In dual-channel mode the kit delivers up to 12.8 GB/s total bandwidth, doubling the single-channel throughput on a compatible platform.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?