Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four black aluminium DDR4 modules with exposed RGB light bars

G.SKILL

G.SKILL F4-3200C14Q-32GTZR TridentZ RGB 32GB (4x8GB) DDR4 3200 CL14 desktop RAM

SKU CH-927R-Q1GAX MPN F4-3200C14Q-32GTZR

A 32GB quad-channel DDR4 kit running at 3200 with CL14 timings, 1.35V, Intel XMP 2.0 and customizable RGB lighting

  • Capacity32GB (4 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL14
  • Timing14-14-14-34
  • Voltage1.35V

Capacity 32GB (4 x 8GB)

Speed DDR4 3200 (PC4 25600)

CAS Latency CL14

  • Low latency CL14 timing for responsive performance
  • 32GB quad-channel kit enables high-capacity multitasking
  • DDR4 3200 speed with Intel XMP 2.0 profile
  • Aluminium heatspreader maintains stable operation at 1.35V
  • Customisable full-range RGB lighting matches any build

TridentZ RGB 32GB quad kit

This 32GB kit contains four matched 8GB modules running at DDR4 3200 with CL14 timings. It targets enthusiasts building high-end desktop systems on supported AMD and Intel platforms. The modules use unbuffered, non-ECC DDR4 and require 1.35V to reach rated speed.

Sustained load behaviour

Tight 14-14-14-34 timings at 3200 MT/s indicate low latency that remains consistent during extended workloads. Intel XMP 2.0 applies the rated profile automatically without manual tuning. Matched quad-channel packaging reduces timing variance between sticks under prolonged stress.

Thermals and power

Aluminium heatspreaders with finned geometry dissipate heat from the ICs during normal operation. The exposed RGB light bar adds no active cooling but does not impede airflow. Rated voltage of 1.35V keeps power draw moderate for DDR4 at this frequency.

Priekšrocības

  • Low latency CL14 timing for responsive performance
  • 32GB quad-channel kit enables high-capacity multitasking
  • DDR4 3200 speed with Intel XMP 2.0 profile
  • Aluminium heatspreader maintains stable operation at 1.35V
  • Customisable full-range RGB lighting matches any build

Specifikācijas

BrandG.SKILL
SeriesTridentZ RGB Series
ModelF4-3200C14Q-32GTZR
Capacity32GB (4 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL14
Timing14-14-14-34
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesSleek aluminum heatspreader design.
Customizable RGB lighting support.
Intel XMP 2.0 Support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the rated XMP overclock speed and system stability will
Recommend UseAMD X399 / TRX40 / X570 / X470 / B550
Intel X299 / Z790 DDR4 / Z690 DDR4 / Z590 / Z490
LED ColorRGB
Sūtījuma svars0.39 kg
Sūtījuma izmēri160 × 135 × 25 mm

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much heat does the 1.35V DDR4 3200 kit produce during all-day use?

The aluminum heatspreader on each 8GB module dissipates heat efficiently at the rated 1.35V, keeping temperatures low during continuous workloads.

What motherboard slot and firmware feature are required to run this quad-channel kit at its rated speed?

A 288-pin DDR4 slot and Intel XMP 2.0 support in the BIOS are needed to enable the 3200 MT/s CL14 profile automatically.

Will the 14-14-14-34 timings stay stable on an older X299 or Z490 platform I already own?

The kit is validated for Intel X299 and Z490 DDR4 boards, so the rated timings should remain stable when XMP 2.0 is enabled.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.