G.SKILL F4-3000C16D-16GTZR 16GB (2 x 8GB) DDR4 3000 CL16 desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
G.SKILL
A dual-channel 16GB DDR4 kit running at 3200 MT/s with CL14 timings and addressable RGB lighting
Capacity 16GB (2 x 8GB)
Speed DDR4 3200 (PC4 25600)
This 16 GB dual-channel kit delivers DDR4 3200 speed with tight CL14 14-14-14-34 timings at 1.35 V. It targets builders who want low-latency memory for AMD X570, X470, B550 or Intel Z790 DDR4 through Z170 platforms.
The hair-line finished aluminum heatspreader uses an aggressive fin array to move heat away from the screened ICs during sustained loads. No active cooling is included, so case airflow determines peak temperature and the modules run silently.
Downloadable software unlocks per-module colour and effect customisation beyond the default rainbow wave. Intel XMP 2.0 support lets the firmware apply the rated profile with a single BIOS selection.
| Brand | G.SKILL |
|---|---|
| Series | TridentZ RGB Series |
| Model | F4-3200C14D-16GTZR |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL14 |
| Timing | 14-14-14-34 |
| Voltage | 1.35V |
| ECC | No |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Sleek aluminum heatspreader design. Customizable RGB lighting support. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock speed and system stability will |
| Recommend Use | AMD X570 / X470 / B550 Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170 |
| LED Color | RGB |
| Sūtījuma svars | 0.19 kg |
| Sūtījuma izmēri | 157 × 135 × 15 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, the kit is validated for Intel Z590 and supports Intel XMP 2.0 so the rated 3200 speed and CL14 timings can be enabled in the BIOS.
The aluminum heatspreader adds height; check your cooler specification for memory clearance, but the kit uses standard 288-pin DDR4 dimensions.
G.SKILL advises against mixing kits; matched modules are tested together for stable operation at the rated 1.35 V and 14-14-14-34 timings.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?