G.SKILL F4-3000C16D-16GTZR 16GB (2 x 8GB) DDR4 3000 CL16 desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
G.SKILL
A dual-channel 16GB DDR4 kit running at 3200 MT/s with CL14 timings and addressable RGB lighting
Capacity 16GB (2 x 8GB)
Speed DDR4 3200 (PC4 25600)
This 16 GB dual-channel kit delivers DDR4 3200 speed with tight CL14 14-14-14-34 timings at 1.35 V. It targets builders who want low-latency memory for AMD X570, X470, B550 or Intel Z790 DDR4 through Z170 platforms.
The hair-line finished aluminum heatspreader uses an aggressive fin array to move heat away from the screened ICs during sustained loads. No active cooling is included, so case airflow determines peak temperature and the modules run silently.
Downloadable software unlocks per-module colour and effect customisation beyond the default rainbow wave. Intel XMP 2.0 support lets the firmware apply the rated profile with a single BIOS selection.
| Brand | G.SKILL |
|---|---|
| Series | TridentZ RGB Series |
| Model | F4-3200C14D-16GTZR |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL14 |
| Timing | 14-14-14-34 |
| Voltage | 1.35V |
| ECC | No |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Sleek aluminum heatspreader design. Customizable RGB lighting support. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock speed and system stability will |
| Recommend Use | AMD X570 / X470 / B550 Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170 |
| LED Color | RGB |
| Lähetyspaino | 0.19 kg |
| Pakkauksen mitat | 157 × 135 × 15 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the kit is validated for Intel Z590 and supports Intel XMP 2.0 so the rated 3200 speed and CL14 timings can be enabled in the BIOS.
The aluminum heatspreader adds height; check your cooler specification for memory clearance, but the kit uses standard 288-pin DDR4 dimensions.
G.SKILL advises against mixing kits; matched modules are tested together for stable operation at the rated 1.35 V and 14-14-14-34 timings.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?