G.SKILL F4-3000C16D-16GTZR 16GB (2 x 8GB) DDR4 3000 CL16 desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
G.SKILL
A dual-channel 16GB DDR4 kit running at 3200 MT/s with CL14 timings and addressable RGB lighting
Capacity 16GB (2 x 8GB)
Speed DDR4 3200 (PC4 25600)
This 16 GB dual-channel kit delivers DDR4 3200 speed with tight CL14 14-14-14-34 timings at 1.35 V. It targets builders who want low-latency memory for AMD X570, X470, B550 or Intel Z790 DDR4 through Z170 platforms.
The hair-line finished aluminum heatspreader uses an aggressive fin array to move heat away from the screened ICs during sustained loads. No active cooling is included, so case airflow determines peak temperature and the modules run silently.
Downloadable software unlocks per-module colour and effect customisation beyond the default rainbow wave. Intel XMP 2.0 support lets the firmware apply the rated profile with a single BIOS selection.
| Brand | G.SKILL |
|---|---|
| Series | TridentZ RGB Series |
| Model | F4-3200C14D-16GTZR |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL14 |
| Timing | 14-14-14-34 |
| Voltage | 1.35V |
| ECC | No |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Sleek aluminum heatspreader design. Customizable RGB lighting support. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock speed and system stability will |
| Recommend Use | AMD X570 / X470 / B550 Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170 |
| LED Color | RGB |
| Težina pošiljke | 0.19 kg |
| Dimenzije pakiranja | 157 × 135 × 15 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Yes, the kit is validated for Intel Z590 and supports Intel XMP 2.0 so the rated 3200 speed and CL14 timings can be enabled in the BIOS.
The aluminum heatspreader adds height; check your cooler specification for memory clearance, but the kit uses standard 288-pin DDR4 dimensions.
G.SKILL advises against mixing kits; matched modules are tested together for stable operation at the rated 1.35 V and 14-14-14-34 timings.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?