Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two black aluminium heatspreader DIMMs with exposed RGB light bars

G.SKILL

G.SKILL F4-3200C16D-16GTZR Trident Z RGB 16GB (2x8GB) DDR4 3200 CL16 desktop RAM

SKU CH-M6H7-WSJGK MPN F4-3200C16D-16GTZR

Dual-channel 16 GB DDR4 kit runs at 3200 MT/s with CL16 timings and 1.35 V XMP 2.0 profiles

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL16
  • Timing16-18-18-38
  • Voltage1.35V

Capacity 16GB (2 x 8GB)

Speed DDR4 3200 (PC4 25600)

CAS Latency CL16

  • Dual-channel 16 GB kit boosts multitasking throughput
  • DDR4 3200 speed with CL16 latency sharpens response
  • 35 V operation keeps thermals in check
  • Aluminium heatspreader with full RGB bar lights your build
  • Intel XMP 2.0 profile enables one-click tuning

Kit contents and intended use

This G.SKILL Trident Z RGB kit delivers 16GB of DDR4 memory as two matched 8GB modules. It targets desktop builders who want a dual-channel configuration with XMP 2.0 support for straightforward speed configuration. The black aluminum heatspreaders and full-length RGB light bar suit colour-coordinated builds on compatible AMD and Intel platforms.

Decisive specification

The kit runs at DDR4 3200 with a CAS latency of CL16 and timings of 16-18-18-38 at 1.35V. These figures determine whether the memory matches the motherboard's supported speed grade and latency requirements for stable operation. The 288-pin unbuffered non-ECC design fits standard consumer DDR4 slots without registration or error correction overhead.

Thermals noise and power

Aluminum heatspreaders with a finned profile dissipate heat from the screened ICs during sustained loads, keeping module temperatures in check without active cooling. The memory operates silently because it has no moving parts. At the rated 1.35V the kit draws modest power consistent with mainstream DDR4 3200 operation, leaving ample headroom for the system's overall power budget.

Kohokohdat

  • Dual-channel 16 GB kit boosts multitasking throughput
  • DDR4 3200 speed with CL16 latency sharpens response
  • 35 V operation keeps thermals in check
  • Aluminium heatspreader with full RGB bar lights your build
  • Intel XMP 2.0 profile enables one-click tuning

Tekniset tiedot

BrandG.SKILL
SeriesTridentZ RGB Series
ModelF4-3200C16D-16GTZR
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL16
Timing16-18-18-38
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesSleek aluminum heatspreader design.
Customizable RGB lighting support.
Intel XMP 2.0 Support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the rated XMP overclock speed and system stability will
Recommend UseAMD X570 / X470 / B550
Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490
LED ColorRGB
Lähetyspaino0.19 kg
Pakkauksen mitat160 × 135 × 18 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this kit run at 3200 on a Z690 DDR4 board without manual tuning?

Yes, the kit includes an Intel XMP 2.0 profile that sets 3200 speed, CL16 timing and 1.35V automatically on supported Z690 DDR4 motherboards.

Does the 288-pin layout fit standard desktop DDR4 slots on B550 or X570 boards?

The modules use the standard 288-pin DDR4 form factor and are listed for AMD B550 and X570 platforms, so they install directly into those boards.

Can I add a second 16GB kit later to reach 32GB?

G.SKILL advises against mixing kits; matched modules are tested to run together as a set, so a single 32GB kit is the supported route.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.