BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
G.SKILL
Dual-channel 32 GB kit of 288-pin DDR4 2666 memory with CL15 timing and a 42 mm red aluminum heatspreader
This 32GB kit contains two 16GB DDR4 modules rated at 2666 MT/s with CL15 timings. It targets desktop builders who want reliable capacity for gaming, editing or data work on Intel platforms that support XMP 2.0. The unbuffered non-ECC design fits standard consumer motherboards.
The red aluminium spreader keeps the sticks cool at the rated 1.20 volts without active cooling. A 42mm profile clears most oversized CPU coolers so airflow stays unobstructed. Low voltage and tight 15-15-15-35 timings help limit power draw during sustained workloads.
Each kit is tested on a wide range of boards covering Intel X99, X299, Z170 through Z690 DDR4 and AMD TRX40, X570, B550 platforms. Matched modules mean you install the pair and enable XMP 2.0 without manual tuning. Do not mix this kit with other memory to preserve stability.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws V Series |
| Model | F4-2666C15D-32GVR |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL15 |
| Timing | 15-15-15-35 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Red |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible Intel platforms. Sleek and stylish aluminum heatspreader design. Intel XMP 2.0 support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the |
| Recommend Use | AMD TRX40 / X570 / B550 Intel X99 / X299 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170 |
| Sūtījuma svars | 0.13 kg |
| Sūtījuma izmēri | 204 × 137 × 17 mm |
Align the notch on each 288-pin module with the motherboard slot key, press down firmly until both retention clips click, then enable the Intel XMP 2.0 profile in BIOS to run at the rated 2666 MT/s CL15 timing.
The aluminum heatspreader requires only occasional dust removal with compressed air; the unbuffered non-ECC DDR4 ICs have no serviceable parts, so replacement is only needed if a module fails or total capacity must exceed 32 GB.
The 42 mm module height fits most large CPU coolers, but in extremely cramped builds the heatspreader can contact oversized heatsinks, making physical clearance the first practical constraint during prolonged high-load operation.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?