Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two red aluminum heatspreaders on black DDR4 modules, 42mm tall, dual-channel kit

G.SKILL

G.SKILL Ripjaws V F4-2666C15D-32GVR 32GB (2×16GB) DDR4 2666 CL15 desktop RAM

SKU CH-K280-F4J0W MPN F4-2666C15D-32GVR

Dual-channel 32 GB kit of 288-pin DDR4 2666 memory with CL15 timing and a 42 mm red aluminum heatspreader

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL15
  • Timing15-15-15-35
  • Voltage1.20V
  • 32 GB dual-channel kit doubles memory bandwidth for multitasking
  • DDR4 2666 speed delivers 21300 MT/s transfer rate for responsive workloads
  • CL15 15-15-15-35 timings reduce latency in gaming and content creation
  • 20 V operation lowers power draw and heat under load
  • 42 mm aluminium heatspreader clears most oversized CPU coolers

Ripjaws V DDR4 32GB dual-channel kit

This 32GB kit contains two 16GB DDR4 modules rated at 2666 MT/s with CL15 timings. It targets desktop builders who want reliable capacity for gaming, editing or data work on Intel platforms that support XMP 2.0. The unbuffered non-ECC design fits standard consumer motherboards.

Aluminium heatspreader runs at 1.20V

The red aluminium spreader keeps the sticks cool at the rated 1.20 volts without active cooling. A 42mm profile clears most oversized CPU coolers so airflow stays unobstructed. Low voltage and tight 15-15-15-35 timings help limit power draw during sustained workloads.

288-pin DIMMs validated across major motherboard

Each kit is tested on a wide range of boards covering Intel X99, X299, Z170 through Z690 DDR4 and AMD TRX40, X570, B550 platforms. Matched modules mean you install the pair and enable XMP 2.0 without manual tuning. Do not mix this kit with other memory to preserve stability.

Kohokohdat

  • 32 GB dual-channel kit doubles memory bandwidth for multitasking
  • DDR4 2666 speed delivers 21300 MT/s transfer rate for responsive workloads
  • CL15 15-15-15-35 timings reduce latency in gaming and content creation
  • 20 V operation lowers power draw and heat under load
  • 42 mm aluminium heatspreader clears most oversized CPU coolers

Tekniset tiedot

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-2666C15D-32GVR
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL15
Timing15-15-15-35
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorRed
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseAMD TRX40 / X570 / B550
Intel X99 / X299 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170
Lähetyspaino0.13 kg
Pakkauksen mitat204 × 137 × 17 mm

Kysymyksiä tästä tuotteesta

How do I install the 288-pin DDR4 modules and what step is often missed?

Align the notch on each 288-pin module with the motherboard slot key, press down firmly until both retention clips click, then enable the Intel XMP 2.0 profile in BIOS to run at the rated 2666 MT/s CL15 timing.

What maintenance or replacement will the Ripjaws V kit need later?

The aluminum heatspreader requires only occasional dust removal with compressed air; the unbuffered non-ECC DDR4 ICs have no serviceable parts, so replacement is only needed if a module fails or total capacity must exceed 32 GB.

What limit appears first under sustained heavy workloads?

The 42 mm module height fits most large CPU coolers, but in extremely cramped builds the heatspreader can contact oversized heatsinks, making physical clearance the first practical constraint during prolonged high-load operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.