Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

G.SKILL

G.SKILL Trident Z5 F5-5600J3636C16GX2-TZ5S 32GB (2×16GB) DDR5 5600 CL36 desktop RAM

SKU CH-R61F-A30BF MPN F5-5600J3636C16GX2-TZ5S

32 GB dual-channel DDR5 kit at 5600 MT/s with CL36 timing and 1.20 V aluminium heatspreaders

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5600
  • CAS LatencyCL36
  • Timing36-36-36-89
  • Voltage1.20V

Capacity 32GB (2 x 16GB)

CAS Latency CL36

Color Silver

LED Color None

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • DDR5 5600 speed for fast data transfer
  • CL36 CAS latency with 36-36-36-89 timings for responsive performance
  • 20V operating voltage for efficient power use
  • Dual-channel 2×16GB kit totalling 32GB capacity
  • Intel XMP 3.0 profile enables one-click overclocking

Trident Z5 DDR5 5600 CL36 Kit

This 32 GB kit contains two 16 GB DDR5 modules rated at 5600 MT/s with CL36 36-36-36-89 timings at 1.20 V. It is built for Intel 600 Series platforms and uses Intel XMP 3.0 profiles for automatic configuration. The silver aluminium heatspreader covers unbuffered non-ECC 288-pin DIMMs designed for enthusiast desktop builds.

Intel XMP 3.0 Profile Activation

Enabling the XMP 3.0 profile in the BIOS sets the rated 5600 speed and CL36 timings without manual voltage or frequency adjustments. The matched dual-channel kit ensures both modules share identical IC characteristics for stable operation at the advertised specification. No additional software or driver installation is required to access the performance profile.

288-Pin DIMM Installation Notes

Modules install vertically into standard DDR5 DIMM slots using the single off-centre notch for keyed alignment. Common issues include failing to seat both retention clips fully or leaving the XMP profile disabled, which leaves the memory running at a lower default speed. Mixing this kit with any other memory kit is not supported and can prevent boot or cause instability.

Priekšrocības

  • DDR5 5600 speed for fast data transfer
  • CL36 CAS latency with 36-36-36-89 timings for responsive performance
  • 20V operating voltage for efficient power use
  • Dual-channel 2×16GB kit totalling 32GB capacity
  • Intel XMP 3.0 profile enables one-click overclocking

Specifikācijas

BrandG.SKILL
SeriesTrident Z5 Series
ModelF5-5600J3636C16GX2-TZ5S
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR5 5600
CAS LatencyCL36
Timing36-36-36-89
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorSilver
Heat SpreaderYes
FeaturesExtreme performance DDR5 memory designed for PC enthusiasts
Intel XMP 3.0 Support
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the rated XMP overclock speed and system stability will depend on the
Recommend UseIntel 600 Series
LED ColorNone
Sūtījuma svars0.09 kg
Sūtījuma izmēri160 × 137 × 15 mm

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will this dual-channel kit run at 5600 speed on a four-slot motherboard?

The kit is a matched 2 x 16 GB set tested for dual-channel operation. Populate the two primary slots indicated in the board manual to enable the XMP 3.0 profile at 5600.

Is the 1.20 V voltage compatible with standard DDR5 boards?

Yes, 1.20 V is the baseline DDR5 voltage and works on any desktop board that supports DDR5.

Does the silver heatspreader fit under large CPU coolers?

The low-profile aluminium spreader is designed for standard clearance; check your cooler’s RAM-height spec to confirm.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.