Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two silver DDR5 memory modules with black brushed-aluminum heatspreader strips

G.SKILL

G.SKILL Trident Z5 F5-5600J3636C16GX2-TZ5S 32GB (2×16GB) DDR5 5600 CL36 desktop RAM

SKU CH-R61F-A30BF MPN F5-5600J3636C16GX2-TZ5S

32 GB dual-channel DDR5 kit at 5600 MT/s with CL36 timing and 1.20 V aluminium heatspreaders

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5600
  • CAS LatencyCL36
  • Timing36-36-36-89
  • Voltage1.20V

Capacity 32GB (2 x 16GB)

Speed DDR5 5600 (PC5 44800)

CAS Latency CL36

Color Silver

LED Color None

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • DDR5 5600 speed for fast data transfer
  • CL36 CAS latency with 36-36-36-89 timings for responsive performance
  • 20V operating voltage for efficient power use
  • Dual-channel 2×16GB kit totalling 32GB capacity
  • Intel XMP 3.0 profile enables one-click overclocking

Trident Z5 DDR5 5600 CL36 Kit

This 32 GB kit contains two 16 GB DDR5 modules rated at 5600 MT/s with CL36 36-36-36-89 timings at 1.20 V. It is built for Intel 600 Series platforms and uses Intel XMP 3.0 profiles for automatic configuration. The silver aluminium heatspreader covers unbuffered non-ECC 288-pin DIMMs designed for enthusiast desktop builds.

Intel XMP 3.0 Profile Activation

Enabling the XMP 3.0 profile in the BIOS sets the rated 5600 speed and CL36 timings without manual voltage or frequency adjustments. The matched dual-channel kit ensures both modules share identical IC characteristics for stable operation at the advertised specification. No additional software or driver installation is required to access the performance profile.

288-Pin DIMM Installation Notes

Modules install vertically into standard DDR5 DIMM slots using the single off-centre notch for keyed alignment. Common issues include failing to seat both retention clips fully or leaving the XMP profile disabled, which leaves the memory running at a lower default speed. Mixing this kit with any other memory kit is not supported and can prevent boot or cause instability.

Kohokohdat

  • DDR5 5600 speed for fast data transfer
  • CL36 CAS latency with 36-36-36-89 timings for responsive performance
  • 20V operating voltage for efficient power use
  • Dual-channel 2×16GB kit totalling 32GB capacity
  • Intel XMP 3.0 profile enables one-click overclocking

Tekniset tiedot

BrandG.SKILL
SeriesTrident Z5 Series
ModelF5-5600J3636C16GX2-TZ5S
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR5 5600
CAS LatencyCL36
Timing36-36-36-89
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorSilver
Heat SpreaderYes
FeaturesExtreme performance DDR5 memory designed for PC enthusiasts
Intel XMP 3.0 Support
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the rated XMP overclock speed and system stability will depend on the
Recommend UseIntel 600 Series
LED ColorNone
Lähetyspaino0.09 kg
Pakkauksen mitat160 × 137 × 15 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this dual-channel kit run at 5600 speed on a four-slot motherboard?

The kit is a matched 2 x 16 GB set tested for dual-channel operation. Populate the two primary slots indicated in the board manual to enable the XMP 3.0 profile at 5600.

Is the 1.20 V voltage compatible with standard DDR5 boards?

Yes, 1.20 V is the baseline DDR5 voltage and works on any desktop board that supports DDR5.

Does the silver heatspreader fit under large CPU coolers?

The low-profile aluminium spreader is designed for standard clearance; check your cooler’s RAM-height spec to confirm.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.